Home › datasheet
 

Keywords :   


Tag: datasheet

Voltage Controlled Amplifiers: AGC525 Datasheet

2015-10-14 13:22:18| rfglobalnet Downloads

The AGC525 is a high-performance TO-8 voltage controlled amplifier with a 10 to 500 MHz operating frequency range. This model also features a typical gain of 25.5 dB, a high AGC range of 30.0 dB, and a low noise figure of 5.0 dB.

Tags: controlled voltage amplifiers datasheet

 

Voltage Controlled Amplifiers: AGC-330 Datasheet

2015-10-14 13:18:56| rfglobalnet Downloads

The AGC-330 is a high-performance TO-3 voltage controlled amplifier with a 5 to 300 MHz operating frequency range. This model also features a typical gain of 22 dB, a high AGC range of 36.0 dB, and a low noise figure of 4.0 dB.

Tags: controlled voltage amplifiers datasheet

 
 

Voltage Controlled Amplifiers: AGC230 Datasheet

2015-10-14 13:16:37| rfglobalnet Downloads

The AGC230 is a high-performance TO-8 voltage controlled amplifier with a 20 to 250 MHz operating frequency range. This model also features a typical gain of 46 dB, a high AGC range of 50.0 dB, and a low noise figure of 5.0 dB.

Tags: controlled voltage amplifiers datasheet

 

Ultra-Low Jitter Quad Output Oscillator: M9200 Datasheet

2015-10-14 10:53:49| rfglobalnet Downloads

The M9200 is an ultra-low jitter quad output oscillator designed to increase overall performance and accelerate time-to-market while eliminating usage of external components for high-speed switching applications in datacom, telecom, and server markets. This oscillator integrates a clock and buffer into the same package with measured output performance, and a best in class maximum RMS jitter specification of 100fs.

Tags: output quad datasheet oscillator

 

Phase Noise Test Systems: Model 7000 Series Datasheet

2015-10-13 16:11:52| rfglobalnet Downloads

The Model 7000 Series of Phase Noise Test Systems operates within the 5 MHz to 26 GHz range, and is available in the 7300 model or the 7070 model. These flexible instruments are designed to provide an essential set of measurement functions for assessing signal sources with VHF to microwave frequencies. These phase noise test systems can be used with crystal oscillators, PLL synthesizers, clocks, phased locked VCOs, DDROs, and more.

Tags: test systems series model

 

Sites : [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] next »