Home datasheet
 

Keywords :   


Tag: datasheet

High Efficiency Small Cell Power Amplifier: TQP9326 Datasheet

2015-09-24 18:05:25| rfglobalnet Products

The TQP9326 is a 0.5 Watt, two-stage power amplifier that provides 30 dB gain and 27 dBm of output power. The TQP9326 offers a pre-distortion correction over the 2.3-2.7 GHz frequency range for a number of different Bands, and applications such as enterprise femtocells, and small cell base stations.

Tags: high power small cell

 

High Efficiency Small Cell Power Amplifier: TQP9321 Datasheet

2015-09-24 18:02:24| rfglobalnet Downloads

The TQP9321 is a 0.5 Watt, two-stage power amplifier that provides 34 dB gain and 27 dBm of output power. The TQP9321 offers a pre-distortion correction over the 1.8-2.17 GHz frequency range for a number of different Bands, and applications such as enterprise femtocells, and small cell base stations.

Tags: high power small cell

 
 

Ultra-Low Noise Bypass LNAs: TQL9065 Datasheet

2015-09-24 17:48:46| rfglobalnet Downloads

The TQL9065 is a 2-stage LNA covering the 1.5 – 3.8 GHz band and providing 36 dB gain, +35 dBm OIP3, and 0.5 dB noise figure while drawing 160 mA current from a +5 V supply. This device is internally matched through an E-pHEMT process, and contains an internal active bias to maintain high-performance over temperature.

Tags: noise bypass datasheet ultralow

 

Ultra-Low Noise Bypass LNAs: TQL9063 Datasheet

2015-09-24 17:44:15| rfglobalnet Downloads

The TQL9063 is a 1-stage LNA covering the 1.5 – 4.0 GHz band with a typical 19 dB gain, +36.3 dBm OIP3, and 0.7 dB noise figure while drawing 77 mA current from a +5 V supply. This device is internally matched through an E-pHEMT process, and contains an internal active bias to maintain high-performance over temperature.

Tags: noise bypass datasheet ultralow

 

S-Band High-Power Limiter: TGL2927-SM Datasheet

2015-09-24 17:33:58| rfglobalnet Downloads

The TGL2927-SM is a high-power, GaN receiver protection circuit (limiter) covering the 2-4 GHz frequency range, is capable of withstanding up to 200W incident power levels, and allows less than 18 dBm flat leakage to pass through. It is an ideal choice for commercial and military radar applications as well as high power communication systems electronic warfare.

Tags: limiter datasheet highpower sband

 

Sites : [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] next »