je.st
news
Tag: attenuators
Datasheet: Low Cost Attenuators with Ethernet/RS-232 and Manual Control: 50BA-010-127
2013-04-16 18:10:24| wirelessdesignonline Downloads
The 50BA-010-127 is a configuration with two individually controlled solid-state programmable attenuators in a miniature benchtop enclosure. It operates in the 700-3000 MHz frequency range and has an impedance of 50 Ohms (nominal). For additional specifications, download the datasheet.
Attenuators Training Document
2013-03-14 15:50:46| rfglobalnet News Articles
Tags: document
training
attenuators
document training
Step Attenuators cover frequency range up to 67 GHz.
2013-02-05 14:29:50| Industrial Newsroom - All News for Today
RSC series includes R&S RSC base units with or without internal step attenuator and 2 external step attenuators. Latter covers frequencies up to 67 GHz and lets users attenuate signal power step by step manually or by remote control. Every base unit can control up to 4 external step attenuators in parallel. Handling signals up to 18 GHz, base unit with internal step attenuator comes in versions that respectively offer 139, 139.9, and 115 dB max attenuation and 1, 0.1, and 5, dB step size. This story is related to the following:Step Attenuators
Tags: range
cover
step
frequency
Variable Step Attenuators
2013-01-25 06:00:00| Industrial Newsroom - All News for Today
MECA offers six models of variable step attenuators with average power ratings of 2 watts (1000 watts peak) available in 0-10 dB in 1 dB steps, 10-70 dB in 10 dB steps & 0-30 in 1 dB steps. N-female & SMA female covering Hz - 2.0GHz. Since 1961, MECA has designed and manufactured an extensive line of RF/Microwave components with industry leading performance including Fixed Attenuators, Directional & Hybrid Couplers, Isolators/Circulators, Power Divider/Combiners, RF Loads, DC Blocks, Bias ...This story is related to the following:Step Attenuators |
Tags: step
variable
attenuators
variable attenuators
RF Attenuators
2013-01-25 06:00:00| Industrial Newsroom - All News for Today
MECA Electronics offer an innovative Attenuators that are used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. Attenuators are used to extend the dynamic range of devices such as power meters and amplifiers, reduce signal levels to detectors, match circuits and are used daily in lab applications to aid in product design. Attenuators are also used to balance out transmission lines that otherwise would have unequal signal ...This story is related to the following:Electronic Components and DevicesSearch for suppliers of: Attenuators
Tags: attenuators
Sites : [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] next »