je.st
news
Tag: switch
Galderma To Meet with FDA About Rx-to-OTC Acne Switch
2016-03-02 06:00:00| Happi Breaking News
Kline & Co. delves into forces and trends shaping this growing category.
0.4 2.7 GHz SP6T LTE Transmit/Receive Switch: SKY13526-485LF Datasheet
2016-02-29 16:31:38| rfglobalnet Downloads
The SKY13526-485LF from Skyworks is a single-pole, six-throw (SP6T) switch designed specifically for use in 2G/3G/4G multimode cellular tablets and handsets (LTE, UMTS, CDMA2000, EDGE), and embedded data cards. It operates in the 0.4 to 2.7 broadband frequency range, and maintains low insertion loss and high isolation for both transmit and receive switching paths.
Tags: switch
ghz
datasheet
lte
0.4 2.7 GHz SP6T LTE Transmit/Receive Switch: SKY13526-485LF Datasheet
2016-02-29 16:31:38| wirelessdesignonline Downloads
The SKY13526-485LF from Skyworks is a single-pole, six-throw (SP6T) switch designed specifically for use in 2G/3G/4G multimode cellular tablets and handsets (LTE, UMTS, CDMA2000, EDGE), and embedded data cards. It operates in the 0.4 to 2.7 broadband frequency range, and maintains low insertion loss and high isolation for both transmit and receive switching paths.
Tags: switch
ghz
datasheet
lte
0.4 2.7 GHz SP6T LTE Transmit/Receive Switch With MIPI RFFE Interface: SKY13526-485LF
2016-02-29 16:26:35| rfglobalnet Home Page
The SKY13526-485LF from Skyworks is a single-pole, six-throw (SP6T) switch designed specifically for use in 2G/3G/4G multimode cellular tablets and handsets (LTE, UMTS, CDMA2000, EDGE), and embedded data cards. Switching is controlled by the MIPI decoder and has an external MIPI select pin that enables how the switch responds to power mode triggers.
Tags: interface
switch
ghz
lte
0.4 2.7 GHz SP6T LTE Transmit/Receive Switch With MIPI RFFE Interface: SKY13526-485LF
2016-02-29 16:26:35| wirelessdesignonline Products
The SKY13526-485LF from Skyworks is a single-pole, six-throw (SP6T) switch designed specifically for use in 2G/3G/4G multimode cellular tablets and handsets (LTE, UMTS, CDMA2000, EDGE), and embedded data cards. Switching is controlled by the MIPI decoder and has an external MIPI select pin that enables how the switch responds to power mode triggers.
Tags: interface
switch
ghz
lte
Sites : [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] next »