je.st
news
Tag: sealed
Sealed Air Corp. (SEE) Announces Quarterly Earnings, Misses Expectations By $0.03 EPS
2014-02-06 16:15:38| Industrial Machines - Topix.net
Sealed Air Corp. issued its quarterly earnings data on Thursday. The company reported $0.34 EPS for the quarter, missing the Thomson Reuters consensus estimate of $0.37 by $0.03, StockRatingsNetwork reports.
Tags: air
corp
expectations
quarterly
Sealed Wall Mount Enclosures suit harsh environments.
2014-01-27 14:31:31| Industrial Newsroom - All News for Today
Suitable for housing electrical equipment and electronic systems, HWSSHK 304 and 316L stainless steel wallmount enclosures are sealed to NEMA 4X (IP66) and come in 30 sizes from 24 x 20 x 6 in. to 60 x 36 x 16 in. Corrosion resistance does not degrade after scratching or other surface damage, and 3-point, heavy-duty, padlockable handle mechanism increases sealing efficacy while minimizing effort required to open/close door. Removable inner mounting panel can be painted or galvanized. This story is related to the following:Electronic Components and Devices Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Stainless Steel Enclosures | Electronic Enclosures |
Tags: wall
suit
mount
environments
Vapor Sealed Insulation Kits feature removable/reusable design.
2014-01-27 14:31:31| Industrial Newsroom - All News for Today
Rated to min/max temperatures of 32°F/250°F, Ever Green® Chill-In Insulation Kits combat condensation, corrosion, and energy waste on chilled water or dual temperature systems. Kits contain everything needed for on-site fabrication and installation, including quilted 4 x 8 ft insulated blanket with zero-perm vapor retarder; 75 ft roll of 4 in. wide zero-perm pressure sensitive tape; silicone caulk; and utility knife. Measuring 2 in. thick, fiberglass blanket meets 25/50 per ASTM E84. This story is related to the following:Vapor Barrier Insulation | Fiberglass Insulation
Tags: design
feature
kits
sealed
Sealed Air Celebrates Bubble Wrap Appreciation Day with First-Ever Hall of Fame Induction
2014-01-27 08:24:57| Industrial Machines - Topix.net
Information contained on this page is provided by an independent third-party content provider.
Sealed Contactor supports high current DC switching.
2014-01-15 14:32:21| Industrial Newsroom - All News for Today
Rated for continuous duty up to 1,000 A, GX110 SPST-NO Contactor is capable of switching high current loads at voltages to 800 Vdc. Unit operates from -55 to 90°C and can carry up to 5,000 A for short durations. Cut throat coil technology means low coil hold power without noise issues associated with PWM coils. Using EPIC® hermetic seal, GX110 meets UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations along with IP67 for water immersion up to 30 min. This story is related to the following:Single Pole, Single Throw (SPST) Switches | High Current Switches | High Voltage Contactors | 200 Amp To 6000 Amp Contactors |
Tags: high
current
supports
sealed
Sites : [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] next »