je.st
news
Tag: processes
Materials and Processes Laboratory Technician
2019-09-26 14:15:55| Space-careers.com Jobs RSS
Caring about space experts like you for more than 35 years. Matchmaking the best candidates for engineering, scientific and administrative positions at our customers. Investing in you to support the development of the European space industry. This is HE Space. We are currently looking for a Materials and Processes Laboratory Technician to support our customer in the Netherlands. Materials and Processes Laboratory Technician Key Tasks and Responsibilities As part of the Materials Processes Section, you will have the following responsibilities Perform all measurements and analyses on metallic as well as nonmetallic materials on a variety of nondestructive test tools. Including the issuing of dedicated testing procedures and documentation development as well as inclusion of test requests and test results in the relevant quality management systems and databases Set up and operate analysis tools devoted to the assessment of space environmental effects. Including assessment by simulating the space environment vacuum, radiation, ATOX, contamination, thermal, etc. as well as prepost characterisation by analytical techniques Perform mechanical and thermomechanical testing including static, fatigue, Nano indentation, Nano scratch, low speed impact, hardness testing, also using contact and contact less insitu strain measurement systems strain gaugesARAMIS Perform all thermal analysis on materials including thermogravimetric, differential scanning calorimetry, thermomechanical as well as dynamic mechanical analysis, dielectric analysis, CTE determination, thermal diffusivityconductivity analysis as well as coupled and advanced thermal modelling techniques for physicochemical analysis. Skills Experience You will have the following qualifications and relevant experience Proven handson experience in Nondestructive investigation such as Xray tomography, XRD Static, dynamic and thermomechanical characterisation of materials and Failure investigations and root cause analysis Solid background in materials engineering, including metallurgy, polymer composites, adhesives, ceramics and glasses Proven understanding and knowledge of analytical techniques for materials analysis and ability to carry them out in compliance to an ISO 17025 or other Quality Management System applicable standards Fluency in English is mandatory knowledge of another European language is an advantage. This job is located in Noordwijk. We welcome applicants who are available from November 2019 or as soon as possible thereafter. If you think you have what it takes for this job, please send us your CV together with a letter of motivation both in English and in Word to Mr. Yannik Dubois via the website www.hespace.comvacancies, ASAP but no later than 13Oct19 quoting job NL 4184.
Tags: materials
processes
laboratory
technician
Materials and Processes Laboratory Technician
2019-09-20 11:16:09| Space-careers.com Jobs RSS
Position Reference 577 You will have the opportunity to provide support to the Materials Processes Section at the European Space Agency. Tasks and Activities The scope of work will include In collaboration and support of the Metallic and NonMetallic Materials and Processes as well as Evaluation Engineer, assess customers needs in relation to laboratoryanalysis activities. Perform all measurements and analyses on metallic as well as nonmetallic materials including cleanliness and contamination control related activities as well as PCBs and electronic assembly on a variety of destructive and nondestructive test equipmenttools. This includes also the issuing of dedicated testing procedures and documentation development as well as inclusion of test requests and test results in the relevant quality management systems and databases. Set up and operate equipmentanalysis tools devoted to the assessment of space environmental effects. This includes assessment by simulating the space environment vacuum, radiation, ATOX, contamination, thermal as well as prepost characterisation by analytical techniques thermal analysis, chemical analysis, physical and microscopic analysis, surface analysis, spectroscopic analysis, NDI techniques etc.. Use a variety of laboratory tools, including acoustic microscopy, optical microscopy scanning microscopy, confocal microscopy, XRD, XRay imaging, NDI etc., XPS, surface tension, Auger Microscopy, Raman Spectroscopy, Atomic Force Microscopy, IST Testing. Perform mechanical and thermomechanical testing including static, fatigue, fatigue crack propagation, Nano indentation, Nano scratch, low speed impact, hardness testing, also using contact and contact less insitu strain measurement systems strain gaugesARAMIS. Perform all thermal analysis on materials including thermogravimetric, differential scanning calorimetry, thermomechanical as well as dynamic mechanical analysis, dielectric analysis, CTE determination, thermal diffusivityconductivity analysis as well as coupled and advanced thermal modelling techniques for physicochemical analysis. Perform all corrosion characterisation testing, including but not limited to stresscorrosion, galvanic, redplague, general corrosion, humiditysalt fog testing, etc. Perform all verification activities on Printed Circuit Boards and electronics assemblies. Recording sample properties or condition during and after test, accurately and legibly. Draft relevant test reports for all performed test activities. Checking on test equipment performance and reporting any anomalies or faults. Improving test procedures and ensuring that these are executed correctly. Maintenance of the relevant test equipment, ensuring that the equipment under your responsibility is kept in an operational state and all necessary routine calibration and maintenance activities are performed. Skills and Experience The following skills and experience are mandatory You have a Technical Degree Bsc., Diploma or equivalent from a recognised Institution or equivalent. You have at least 4 years of relevant work experience. You have proven handson experience in nondestructive investigation such as Xray tomography, XRD You have proven handson experience in static, dynamic and thermomechanical characterisation of materials You have proven handson experience in failure investigations and root cause analysis Combined with a solid background in materials engineering, including metallurgy, polymer composites, adhesives, ceramics and glasses You have strong materials laboratory handson experience related to metallic as well as nonmetallic materials and manufacturing and applied processes including cleanliness and contamination control related activities as well as PCBs and electronic assembly characterisationverification and failure investigation a strong background on space simulation facilities is an asset. You have proven understanding and knowledge of analytical techniques for materials analysis and ability to carry them out in compliance to an ISO 17025 or other Quality Management System applicable standards You have capability of working in a timely and multitasking manner in order to meet assigned deadlines You have good interpersonal and communication skills You are able to issue clear and concise materials testing reports. How to Apply Looking to take your career to the next level? Interested applicants should submit their CV and Cover Letter to RHEAs Recruitment team at careersrheagroup.com no later than 11102019. Preference will be given to candidates eligible for an EU or national personal security clearance at the level of CONFIDENTIAL or above. About RHEA Group RHEA Group is a leading engineering consultancy firm with demonstrated expertise in space, system and secure software solutions. We attract skilled engineers, scientists and management professionals and offer a range of exciting career paths working alongside clients such as the European Space Agency, the European GNSS Agency, EUMETSAT and NATO.
Tags: materials
processes
laboratory
technician
Materials and Processes Laboratory Technician
2019-09-20 11:16:09| Space-careers.com Jobs RSS
We are looking for a Materials and Processes Laboratory Technician E2 to join our Modis Aerospace team, working onsite at the European Space Agency in the Netherlands. Modis Aerospace is a specialized Engineering consultancy with more than 30 years experience providing aerospace Engineers to our key partners in The Netherlands. Modis is a longstanding business partner of the European Space Agency ESA, with more than 120 employees recruited from across Europe currently supporting ESAs activities. General tasks to be performed In collaboration and support of the Metallic and NonMetallic Materials and Processes as well as Evaluation Engineer, assess customers needs in relation to laboratoryanalysis activities Perform all measurements and analyses on metallic as well as nonmetallic materials including cleanliness and contamination control related activities as well as PCBs and electronic assembly on a variety of destructive and nondestructive test equipmenttools. This includes also the issuing of dedicated testing procedures and documentation development as well as inclusion of test requests and test results in the relevant quality management systems and databases To set up and operate equipmentanalysis tools devoted to the assessment of space environmental effects. This includes assessment by simulating the space environment vacuum, radiation, ATOX, contamination, thermal . as well as prepost characterisation by analytical techniques thermal analysis, chemical analysis, physical and microscopic analysis, surface analysis, spectroscopic analysis, NDI techniques etc.Use a variety of laboratory tools, including acoustic microscopy, optical microscopy, scanning microscopy, confocal microscopy, XRD, XRay imaging, NDI etc., XPS, surface tension, Auger Microscopy, Raman Spectroscopy, Atomic Force Microscopy, IST Testing Perform mechanical and thermomechanical testing including static, fatigue, fatigue crack propagation, Nano indentation, Nano scratch, low speed impact, hardness testing, also using contact and contact less insitu strain measurement systems strain gaugesARAMIS Perform all thermal analysis on materials including thermogravimetric, differential scanning calorimetry, thermomechanical as well as dynamic mechanical analysis, dielectric analysis, CTE determination, thermal diffusivityconductivity analysis as well as coupled and advanced thermal modelling techniques for physicochemical analysis. Perform all corrosion characterisation testing, including but not limited to stresscorrosion, galvanic, redplague, general corrosion, humiditysalt fog testing, etc. Perform all verification activities on Printed Circuit Boards and electronics assemblies Recording sample properties or condition during and after test, accurately and legibly Draft relevant test reports for all performed test activities Checking on test equipment performance and reporting any anomalies or faults Improving test procedures and ensuring that these are executed correctly Maintenance of the relevant test equipment, ensuring that the equipment under hisher responsibility is kept in an operational state and all necessary routine calibration and maintenance activities are performed. To successfully perform the above mentioned tasks, the following background experience is required At least a Bachelor degree in relevant discipline Materials or equivalent Solid background in materials engineering, including metallurgy, polymer composites, adhesives, ceramics and glasses. Proven handson experience in Nondestructive investigation such as Xray tomography, XRD Static, dynamic and thermomechanical characterisation of materials Failure investigations and root cause analysis Strong materials laboratory handson experience related to metallic as well as nonmetallic materials and manufacturing and applied processes including cleanliness and contamination control related activities as well as PCBs and electronic assembly characterisationverification and failure investigation a strong background on space simulation facilities is an asset. Proven understanding and knowledge of analytical techniques for materials analysis and ability to carry them out in compliance to an ISO 17025 or other Quality Management System applicable standards Capability of working in a timely and multitasking manner in order to meet assigned deadlines Good interpersonal and communication skills Ability to issue clear and concise materials testing reports About ESAESTEC The European Space Agency ESA has sites in several European countries. The European Space Research and Technology Centre ESTEC is the largest site and the technical heart of ESA. This nursery of European space activities is located in Noordwijk, Netherlands. At ESTEC, about 2500 engineers, technicians and scientists work handson with mission design, spacecraft and space technology. Almost all ESA projects except launchers are managed from ESTEC. In Noordwijk, people work on science missions, manned space missions, Earth observation, telecommunications and navigation satellites. ESTEC provides extensive testing facilities to verify the proper operation of spacecraft, such as the Large Space Simulator LSS, acoustic and electromagnetic testing bays, multiaxis vibration tables and the ESA Propulsion Laboratory EPL. Please send your CV to recruitmentaerospacemodis.com before 11102019
Tags: materials
processes
laboratory
technician
Materials and Processes Laboratory Technician
2019-09-19 12:16:18| Space-careers.com Jobs RSS
Materials and Processes Laboratory Technician Deadline for applications 14102019 Client and Location The European Space Agency is ATGs biggest client. They are an international organisation with 22 member states with sites in the Netherlands, Germany, Spain, France, Italy, UK and Belgium. ESA is Europes gateway to Space! Job Description For our client, the European Space Agency ESA, we are looking for a Materials and Processes Laboratory Technician for their location in Noordwijk, the Netherlands, to join their Materials and Processes Section. Tasks and Responsibilities In collaboration and support of the Metallic and NonMetallic Materials and Processes as well as Evaluation Engineer, assess customers needs in relation to laboratoryanalysis activities Perform all measurements and analyses on metallic as well as nonmetallic materials including cleanliness and contamination control related activities as well as PCBs and electronic assembly on a variety of destructive and nondestructive test equipmenttools. This includes also the issuing of dedicated testing procedures and documentation development as well as inclusion of test requests and test results in the relevant quality management systems and databases To set up and operate equipmentanalysis tools devoted to the assessment of space environmental effects. This includes assessment by simulating the space environment vacuum, radiation, ATOX, contamination, thermal . as well as prepost characterisation by analytical techniques thermal analysis, chemical analysis, physical and microscopic analysis, surface analysis, spectroscopic analysis, NDI techniques etc.. Use a variety of laboratory tools, including acoustic microscopy, optical microscopy, scanning microscopy, confocal microscopy, XRD, XRay imaging, NDI etc., XPS, surface tension, Auger Microscopy, Raman Spectroscopy, Atomic Force Microscopy, IST Testing Perform mechanical and thermomechanical testing including static, fatigue, fatigue crack propagation, Nano indentation, Nano scratch, low speed impact, hardness testing, also using contact and contact less insitu strain measurement systems strain gaugesARAMIS Perform all thermal analysis on materials including thermogravimetric, differential scanning calorimetry, thermomechanical as well as dynamic mechanical analysis, dielectric analysis, CTE determination, thermal diffusivityconductivity analysis as well as coupled and advanced thermal modelling techniques for physicochemical analysis Perform all corrosion characterisation testing, including but not limited to stresscorrosion, galvanic, redplague, general corrosion, humiditysalt fog testing, etc. Perform all verification activities on Printed Circuit Boards and electronics assemblies Recording sample properties or condition during and after test, accurately and legibly Draft relevant test reports for all performed test activities Checking on test equipment performance and reporting any anomalies or faults Improving test procedures and ensuring that these are executed correctly Maintenance of the relevant test equipment, ensuring that the equipment under hisher responsibility is kept in an operational state and all necessary routine calibration and maintenance activities are performed. Requirements Technical degree Bsc, Diploma or equivalent in Aerospace Engineering, Computer Science or in similar fields with at least 4 years of relevant experience Proven handson experience in Nondestructive investigation such as Xray tomography, XRD Static, dynamic and thermomechanical characterisation of materials Failure investigations and root cause analysis Combined with a solid background in materials engineering, including metallurgy, polymer composites, adhesives, ceramics and glasses Strong materials laboratory handson experience related to metallic as well as nonmetallic materials and manufacturing and applied processes including cleanliness and contamination control related activities as well as PCBs and electronic assembly characterisationverification and failure investigation a strong background on space simulation facilities is an asset Proven understanding and knowledge of analytical techniques for materials analysis and ability to carry them out in compliance to an ISO 17025 or other Quality Management System applicable standards Capability of working in a timely and multitasking manner in order to meet assigned deadlines Good interpersonal and communication skills Ability to issue clear and concise materials testing reports. What do we offer? ATG offers excellent working conditions and provide you with all the other necessary means to further your career. We believe that training and education, combined with regular assessments and a personal development plan, will create the best environment for growth. If needed, we also assist you with settling in your new home or finding the right school for your children. ATG will help in any way it can, including a relocation budget that is applicable for ATG staff as well as employees working at one of our clients. About ATG Europe Today, ATG is recognized as a leading provider of specialized engineering, scientific and technical services to the European Space industry. Our headquarters is located in Noordwijk, the Netherlands and we have subsidiaries in Germany and the UK. Besides these countries, ATG also operates in Belgium, Sweden and Norway. ATG People is the key player in delivering highly educated personnel for RD environments throughout Europe. We are continually recruiting experienced Engineers for exciting, fulltime positions based at our customers sites. As an ATG Engineer, you will be working on very diverse missions and assignments. This opens up unique opportunities to be engaged in innovative projects and challenging you to perform to high standards and utilizing the full extent of your professional knowledge. Interested? Submit your CV and personal details through our website at www.jointhebrightestminds.com. For further questions, you can also contact our recruitment consultant Estefania Ochoa directly on phone number 31 0 71 579 55 51.
Tags: materials
processes
laboratory
technician
New DeSL modules cover key supply chain processes
2019-09-18 17:47:00| Daily apparel & textile news and comment - from just-style.com
End-to-end software provider Discover e-Solutions (DeSL) has launched a suite of modules geared to focus on specific pain points encountered by apparel businesses of all sizes.
Tags: key
cover
supply
processes
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] next »