je.st
news
Tag: 3phase
3-phase cable identifier
2014-06-04 13:00:00| Electrical Construction & Maintenance
The 3ID 3-phase cable identifier pinpoints the correct phases on long lengths of de-energized and discharged overhead and underground cables read more
Tags: cable
identifier
3phase
Capacitors perform 3-phase AC power harmonic filtering.
2014-04-29 14:31:08| Industrial Newsroom - All News for Today
Intended for use on AC output of large inverter system, PFCH capacitor series filters undesirable harmonics before power is delivered to grid or load. Each capacitor is made with 3 self-healing metallized polypropylene windings, connected in delta, and enclosed in cylindrical aluminum case. PFCH ratings range from 0.5–17.5 KVAR at 240 Vac, 0.5–30 KVAR at 480 Vac, and 1–25 KVAR at 600 Vac. Standard cases range from 2.0–3.5 in. dia x 5.75–13.73 in. long. This story is related to the following:Electronic Components and Devices Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Power Supplies | Filter Capacitors | Power Factor Correction (PFC) Capacitors
Tags: power
perform
filtering
harmonic
Compact Fuses provide primary protection of 3-phase systems.
2014-03-21 13:30:57| Industrial Newsroom - All News for Today
Providing 1,500 A breaking capacity at 500 Vac, Series SHF 6.3x32 safeguards electronic systems and operators in event of catastrophic short circuit incident. Units are available in 10 current ratings from 1–8 A with time-lag characteristic according to UL 248-14. Operating from -40 to +85°C, RoHS-compliant fuses are suited for HVAC systems, PV systems, frequency converters, and power electronics. Units are available with panel or board mount clips and holders as well as pigtail leads. This story is related to the following:Current Limiting Fuses
Tags: provide
systems
primary
protection
Power Transducers measure 3-phase wattage consumption.
2014-02-25 14:31:41| Industrial Newsroom - All News for Today
Housed in compact DIN mounted case, APT Series measures 3 phases of current and voltage and produces analog signal proportional to watts used. Monitor uses current transformers to measure amperes, and line voltage connects directly to transducer, up to 600 Vac. Transducers can be configured to accept 5 A secondary current transformers or ProteCT™ low voltage output sensors. Equipped with finger safe terminals, units are externally powered and offer 4–20 mA, 0–5 Vdc, or 0–10 Vdc output. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - MOBILE BANNER ADSearch for suppliers of:
Tags: power
measure
consumption
transducers
DIN Rail Mount, 3-Phase Power Supply delivers up to 960 W.
2013-10-22 14:29:44| Industrial Newsroom - All News for Today
Supplied in corrosion-resistant, aluminum body, CLI II model DRIP operates from -25 to +65°C, provides 24 V output, and withstands up to 30 G shock according to EC 60068-2-27. Unit provides operation without power de-rating over input range of 320–600 HVAC for 3-phase or 380–600 HVAC for 2-phase. Other features include 150% Power Boost (5 sec), efficiency of >92%, and 0.95 power factor. Applied on PCBs, conformal coating protects against dust and chemical pollutants. This story is related to the following:DIN Rail Mounted Power Supplies |