je.st
news
Tag: terminal blocks
Vertical DIN Rail Mount Housing includes terminal blocks.
2014-09-08 14:31:26| Industrial Newsroom - All News for Today
Measuring 22.5 mm wide, CVB-Plus Housing is molded in green self-extinguishing UL94-V0 flame retardant PA66. Unit comes in solid and vented versions, with front and side label recesses, and is supplied with four 4-pole 5 mm pitch pluggable terminal blocks yielding 16 poles. With spring-loaded clips that can be snapped into position, housing can be made chassis/surface mountable. CVB-Plus has 15 A, 300 V rated terminals with 20 mΩ contact resistance and 500 MΩ/500 Vdc insulation resistance. This story is related to the following:Plastic DIN Rail Mount Electronic Enclosures | Electronic Housings
Tags: includes
din
housing
mount
Terminal Blocks cover large wire cross sections.
2014-07-22 14:30:56| Industrial Newsroom - All News for Today
Manufactured from PA 6.6-V0, SRK Series Feed-Through Terminals are available for wire cross sections from 16 –120 mm², covering total range of 0.08–120 mm². Up until 35 mm², terminals feature double cross-connection channel for plug-in cross-connectors. Ground terminal blocks have also been extended by wire cross sections from 16–70 mm². Models up to 35 mm² are contacted with rail by snapping on. Terminals are equipped with large wire entry bay that facilitates wire insertion. This story is related to the following:Electrical Equipment and SystemsSearch for suppliers of: Terminal Blocks | Wire Terminals
Tags: large
cover
cross
sections
DIN Rail-Mount Thermocouple Terminal Blocks are fully enclosed.
2014-07-14 14:31:27| Industrial Newsroom - All News for Today
Along with built-in miniature female thermocouple connector for auditing and troubleshooting, UL-recognized and ROHS-compliant DRTB-2 series features screw type terminal for secure, maintenance-free connections and type K, J, T, E, N R/S and U calibrations. Plastic housing is made from gray polyamide 6.6 thermoplastic resin with UL 94 V0 rating for 85°C, screws are stainless steel and captive, and wire clamps are made of tin-plated brass. No end plates are required. This story is related to the following:Thermocouple Terminal Blocks |
Tags: fully
din
terminal
blocks
Terminal Blocks feature double level design.
2014-07-10 14:30:59| Industrial Newsroom - All News for Today
Available for nominal wire cross sections between 2.5–10 mm², SRKD Series comes in standard models with 2 potentials and 2 x 2 connections, with 4 connections on 1 potential, or as protective Ground Terminal Block with snap-on PE foot contact. Units offer stability, vibration resistance, and optimal attachment of wires to contact point. Manufactured from PA 6.6-V0, terminal housing safely anchors metal parts on inside. Construction of snap-on units ensures firm hold on mounting rail. This story is related to the following:Rail Mounted Terminal Blocks
Tags: design
level
double
feature
DIN Rail Mount IEC Terminal Blocks carry UL and CE approvals.
2014-06-05 14:31:04| Industrial Newsroom - All News for Today
Featuring universal foot for DIN rail mounting, ASIUKN single-level, feed-through, IEC terminal blocks suit control cabinet and power distribution applications. UL94V0 housing, nickel-plated copper alloy metal bodies, and plated alloy screws provide protection against various environments. While 4.2 mm wide DIN rail mounted terminal block handles 30–14 AWG wire with 15 A rating at 300 V, larger blocks measure 15.2 mm wide and handle 18–2 AWG wire with rating of 150 A at 600 V. This story is related to the following:Terminal Blocks
Tags: din
carry
mount
terminal