je.st
news
Tag: parts
Robotic Parts Cleaning Cell provides flexibility, and reliability.
2015-03-02 14:31:06| Industrial Newsroom - All News for Today
Employing jointly controlled (CNC) and IP69-rated scara manipulator constructed of aluminum and stainless steel, EcoCFlex 3 is used for pre-cleaning and final cleaning of powertrain components. Water knife directs water jet in focused pattern, and hybrid nozzle allows both high- and low-pressure treatments in addition to injection flood washing. Other features include 72 dB(A) operation, cycles starting from 30 sec, 30 kWh energy consumption, 32 m² footprint, and vacuum drier.
Tags: parts
cell
cleaning
reliability
Larger Parts Cleaning Unit is pneumatically driven.
2015-03-02 14:31:06| Industrial Newsroom - All News for Today
With opening diameter sized to permit cleaning of larger parts, 12 in. MiJET™ uses one existing shop air-line at CNC machine for operation and captures coolants for reuse. This pneumatically driven parts cleaning and collection unit also captures chips for recycling. With one-touch operation, parts can be blown off and cleaned immediately after machining while machine continues to cut parts. Exhausted air is filtered to levels that can help facility meet OSHA standards.
Tags: larger
parts
unit
cleaning
Slat Type Conveyor Oven for Drying Steel Parts
2015-03-02 11:31:13| Industrial Newsroom - All News for Today
Parts: pipe nipples Process: cure adhesive Electrically heated slat type conveyor drying oven Maximum Operating Temperature: 200 F SPECIAL FEATURES Air Flow: Top-down airflow using high velocity engineered air nozzles Indexing Conveyor: Slat-type indexing conveyor system using part...
Short Interest Declines 42% For Genuine Parts
2015-02-27 01:56:40| Auto Parts - Topix.net
The most recent short interest data has been released by the NASDAQ for the 02/13/2015 settlement date, which shows a 1,939,486 share decrease in total Co. , to 2,682,767, a decrease of 41.96% since 01/30/2015.
Tags: short
interest
parts
genuine
Re-cleaning Medical Device Vendor Parts
2015-02-26 11:31:44| Industrial Newsroom - All News for Today
Q. Current procedure calls for an ultrasonic bath at 69°C for 20 mins with Liquinox and DI water. Then calls for another such DI bath at 69°C with NO detergent for 20 mins. Then a 1 min DI water flushing. Is this overkill? Is Liquinox appropriate? When I clean the parts, they have already been cleaned by vendor in...
Tags: parts
medical
device
vendor
Sites : [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] next »