Home rates
 

Keywords :   


Tag: rates

Flux-Cored Wires offer high deposition rates.

2013-02-18 14:29:30| Industrial Newsroom - All News for Today

Available in standard diameters of 0.045, 0.052, and 1/16 in., UltraCore® HD-12C and UltraCore® HD-12M are E71T-12C-JH8 and E71T-12M-JH8 flux-cored wires offering weld deposition rates of more than 14 lb/hr out-of-position. UltraCore® HD-12C is optimized for use with 100% CO2, while UltraCore® HD-12M uses mix of 75-80% Ar/balance CO2. Both mild steel FCAW-G products offer low-temperature-impact toughness exceeding 30 lbf-ft at -40°F. This story is related to the following:Materials and Material Processing Sponsored by: CONTREX - PNANewsletter AdSearch for suppliers of: Welding Flux |

Tags: high offer rates wires

 

CBA profits aren't due to rates: Narev

2013-02-17 09:02:30| Automakers - Topix.net

A RECORD boost to the Commonwealth Bank's bottom line cannot be attributed to the bank's decision to withhold interest rate cuts, chief executive Ian Narev says.

Tags: due rates profits cba

 
 

Death, taxes and increasing water and sewer rates: Portland City Hall roundup

2013-02-14 21:15:54| PortlandOnline

Brad Schmidt in The Oregonian, February 14, 2013

Tags: city water rates death

 

Hospitals in U.S. Cut Infection Rates in 2011, CDC Says

2013-02-13 07:27:43| Biotech - Topix.net

U.S. hospitals reduced some types of deadly and costly infections in 2011, three years after a government initiative to cut hospital-acquired illnesses.

Tags: rates says cut hospitals

 

Centrifugal Fans deliver flow rates up to 3,600 cfm.

2013-02-11 14:32:44| Industrial Newsroom - All News for Today

Based upon Homogenous modular design concept, H Forward Curved Centrifugal Fans are direct driven units with motor sizes ranging from 0.18–22 kW, delivering pressures up to 40 mBar. Standard options include 1- and 3-phase versions with 2- or 4-pole metric or NEMA motors. Available with sheet steel, 304 or 316 stainless steel, or aluminum housing, fans offer full range of accessories, including finger guards, inlet and discharge spigots, discharge flanges, and pedestals. This story is related to the following:Forward Curved Fans |

Tags: rates flow fans deliver

 

Sites : [259] [260] [261] [262] [263] [264] [265] [266] [267] [268] [269] [270] [271] [272] [273] [274] [275] [276] [277] [278] next »