je.st
news
Tag: mount enclosures
Transmitter Enclosures Mount Anywhere
2016-08-09 07:17:51| Chemical Processing
Rear enclosures for Signet 9900-1P Transmitter mount onto pipes, walls, tanks, struts, at angles or inside panels for waterproof protection.
Tags: mount
transmitter
enclosures
mount enclosures
Wash Down Duty Wall Mount Enclosures are made of stainless steel.
2015-11-02 14:31:08| Industrial Newsroom - All News for Today
Offered in 18 sizes from 16 x 12 x 8 in. to 60 x 36 x 16 in. in 304 and 316 material, Waterfall Series is approved to NSF/ANSI 169 as well as UL and CSA certified to NEMA 3R, 4, 4X, and 12 (IEC60529 IP66). Smooth No. 4 finish facilitates cleaning, while top and door top slope at 25° to promote water run-off as well as prevent clutter from being placed atop unit. Cleaning is facilitated by V-shaped lip channel, crevice-free quarter-turn door latches, and lift-off hinge design.
Instrument Enclosures mount on suspension arms.
2014-04-09 14:31:00| Industrial Newsroom - All News for Today
Available in ABS for indoor use and fiberglass reinforced polyamide for outdoor use, CARRYTEC Enclosures come in S, M, and L sizes measuring 8.74 x 8.07 x 3.15 in., 10.62 x 9.72 x 3.58 in., and 13.70 x 11.93 x 4.61 in., respectively. Integrated handle can be used as grab point when inverted and fitted to suspension arm. Recessed area on top section accommodates keypads, displays, and touch screens, while inset flat sections on underside enable mounting of connectors or control switches. This story is related to the following:Instrument Enclosures |
Tags: arms
instrument
mount
suspension
Sealed Wall Mount Enclosures suit harsh environments.
2014-01-27 14:31:31| Industrial Newsroom - All News for Today
Suitable for housing electrical equipment and electronic systems, HWSSHK 304 and 316L stainless steel wallmount enclosures are sealed to NEMA 4X (IP66) and come in 30 sizes from 24 x 20 x 6 in. to 60 x 36 x 16 in. Corrosion resistance does not degrade after scratching or other surface damage, and 3-point, heavy-duty, padlockable handle mechanism increases sealing efficacy while minimizing effort required to open/close door. Removable inner mounting panel can be painted or galvanized. This story is related to the following:Electronic Components and Devices Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Stainless Steel Enclosures | Electronic Enclosures |
Tags: wall
suit
mount
environments
Wall Mount Enclosures target control and data applications.
2014-01-09 14:30:33| Industrial Newsroom - All News for Today
Available in 3 standard sizes ranging from 5.51 x 5.51 x 1.83 in. to 8.66 x 8.66 x 1.99 in., NET-BOX Enclosures feature inset cable connection panel, hiding unsightly connectors under removable front lid. Flat design accommodates range of electronic assemblies, displays, and large-volume connectors. Curved top section can be fitted with LEDs, displays, and switches. With UL 94 V-0 rating and ASA+PC material used, enclosures are suitable for outdoor applications. This story is related to the following:Electronic Components and Devices Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Stainless Steel Enclosures | Electronic Enclosures | Electric Enclosures | Instrument Electronic Enclosures
Tags: data
control
applications
target
Sites : [1]