je.st
news
Tag: thermally
Dimensionally Stable Two Component Urethane Modified Epoxy Gel Is Thermally Conductive
2014-01-06 06:00:00| Industrial Newsroom - All News for Today
Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for bonding and sealing as it adheres well to a variety of substrates including metals, glass, ceramics and many rubbers and plastics.<br /> <br /> With a low hardness of 20-30 Shore A, Super Gel 9AO is able to encapsulated sensitive electronic components. ...This story is related to the following:Epoxies | Gels
Tags: modified
component
stable
gel
Non-Sag, Thermally Conductive Epoxy Adhesive
2013-12-16 06:00:00| Industrial Newsroom - All News for Today
With thick paste consistency, Epoxyset's EB-403-1LV-T1 bonds to diverse substrates including metals, composites, glass, ceramics, rubbers, plastics and will not run or sag even when applied to vertical surfaces even at elevated temperatures. Bonds resist thermal cycling, autoclave, as well as chemicals, including water, oils, fuels, acids, bases, and salts. This one component epoxy requires no weighing or mixing and is available in ready to use 10oz cartridges. EB-403-1LV-T1 cures rapidly at ...This story is related to the following:Thermally Conductive Adhesives | Epoxies | Epoxy Adhesives |
Tags: adhesive
epoxy
conductive
thermally
Thermally Conductive Plastics target LED applications.
2013-12-13 14:28:09| Industrial Newsroom - All News for Today
While meeting UL94 V-0 flame resistance requirement, LUVOCOM® thermally conductive and electrically insulative materials are characterized by thermal conductivity from 0.6–1.5 W/mK, impact strength up to 14 lb ft/in.², and tensile strength up to 8,000 psi. Typical materials use base polymers PET and PA 6, which meet application requirements, extend component service life, and exhibit processing characteristics that enable injection molding of complex geometries and thin wall sections. This story is related to the following:Polyethylene |
Tags: applications
led
target
plastics
Saint-Gobain's CarboTherm(TM) Boron Nitride Fillers for Thermally Conductive, Dielectric ...
2013-12-02 06:00:00| Industrial Newsroom - All News for Today
Amherst, NY – Saint-Gobain Ceramic Materials, a pioneer in advanced material solutions, announced today that its range of CarboTherm™ boron nitride thermal management fillers will be on display at the upcoming Compounding World Forum 2013, December 10-11, Booth #2, Hilton City Avenue, Philadelphia.<br /> <br /> CarboTherm Boron Nitride fillers enable manufacturing of thermally conductive, dielectric plastic compounds, allowing compounders to enter new markets for injection molded ...This story is related to the following:Materials and Material ProcessingInsulation Fillers | Boron Nitride |
Tags: dielectric
conductive
thermally
boron
Thermally Conductive Epoxy serves applications up to 572°F.
2013-11-25 14:27:31| Industrial Newsroom - All News for Today
Used for bonding, potting, tooling, and molding, Aremco-Bond™ 805 adheres to high-temperature plastics, glass, ceramic, and high-expansion metals. This 2-component, 100% solids, aluminum-filled epoxy cures at room temperature in 24 hr with final cure at 200°F in 2 hr. Cured material exhibits thermal conductivity of 12.5 Btu-in/hr-ft²-°F and dielectric strength of 50 V/mil. Respective tensile shear and flexural strengths are 1,800 and 15,500 psi, and Shore D Hardness is 87. This story is related to the following:Materials and Material Processing Sponsored by: Sealeze - Category SponsorAdhesives and SealantsEpoxy Coatings | High Temperature Ceramics | High Temperature Ceramic Adhesives | Plastic Adhesives | Epoxy Adhesives | Adhesives | Epoxies | High Temperature Adhesives
Tags: applications
serves
epoxy
conductive