Home system features
 

Keywords :   


Tag: system features

Rack-Mount 2U Power System features hot-pluggable 1 kW modules.

2013-06-25 14:28:24| Industrial Newsroom - All News for Today

Delivering 3 kW or 2 kW with N+1 redundancy, BAP 3K-CR2U/19-3 Series is built with 3 heavy-duty 1 kW BAP 65F DC/DC modules assembled on 2U x 19 in., rack-mount, stainless steel cradle. Mechanical features facilitate insertion of converter modules, and no motherboard is required. Each module accepts nominal input of 48, 72, 110, 125, or 250 Vdc and is available in several output configurations: 24 V/40 A, 48 V/20 A, or 125 Vdc/8 A. Modules typically deliver efficiencies of 90% at full load. This story is related to the following:Controls and ControllersSearch for suppliers of: DC Power Systems | Electronic Control Modules | Modules

Tags: system power features modules

 

Bulk Bag Discharging System Features Low-Headroom Design

2013-06-25 06:00:00| Chemical Processing

Material Transfer & Storage now offers a Material Master bulk bag discharging system with a low-headroom design. The system is 66 inches wide (load side) by 48 inches deep by 30 inches tall. The system features the Seal-Master bag spout chamber with gull-wing doors for quick and easy discharge spout access.

Tags: system design features bag

 
 

System Host Board features full-size PICMG 1.3 form factor.

2013-06-11 14:30:17| Industrial Newsroom - All News for Today

Suitable for factory automation and image processing, ROBO-8112VG2AR is based on Intel Q87 chipset and 4th gen Intel Core processor i7-2770TE, as well as Intel C226 chipset and Intel Xeon E3-1275 v3, E3-1225 v3, and E3-1268L v3 in LGA1150 socket. Board supports dual DDR3 long DIMM sockets at 1,600 MHz, up to 16 GB. In addition to three 6 Gbps SATA ports, dual Intel Gigabit Ethernet LAN chips, and flexible PCI Express expansion, board provides 2 serial ports, 1 FDD port, and 1 parallel port. This story is related to the following:Computer Boards

Tags: system form board features

 

Waterjet System features ball screw drive.

2013-06-10 14:29:37| Industrial Newsroom - All News for Today

With Emerald Series, operators can load material into cutting area from all 4 sides. Additionally, system is capable of indexing sheets of unlimited length in all directions. Providing X-Y travel of 5 x 5 ft with 1 or 2 carriages, system comes standard with 30 hp pump, ball screw drive with 25 mm linear rails, and WARDJet dynamic mini hopper, which features 9 preset abrasive flow rates. This story is related to the following:Waterjetting Equipment | Waterjet Cutting Machinery |

Tags: system features drive ball

 

CO2 Laser-Cutting System features 6 x 12 ft format.

2013-06-06 14:29:26| Industrial Newsroom - All News for Today

Featuring fully automated AO|5 setup, OPTIPLEX 4020 can process materials ranging from thinnest gage steel up to 1 in. thick mild steel with workpiece weight capacity up to 3,527 lb. System features PreView Control with 15 in. touchscreen and GUI that visualizes cutting path and automatically determines process conditions including required lens, nozzle, feedrate, and laser output for different materials and thicknesses. System features are complemented by 4,000 W Type 10 resonator with ECO Mode. This story is related to the following:Laser Cutting Equipment |

Tags: system features format ft

 

Sites : [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] next »