je.st
news
Tag: variable voltage
Voltage Controlled Variable Attenuator: SKY12235
2014-08-07 16:42:51| wirelessdesignonline Downloads
This voltage controlled variable attenuator covers a 1.4 to 2.4 GHz broadband operating range. It features high IIP3 (+61 dBm), a 36 dB maximum attenuation level, and a 0 to 5V control voltage range.
Tags: controlled
variable
voltage
attenuator
Voltage Variable Equalizer has adjustable attenuation slope.
2013-08-28 14:30:36| Industrial Newsroom - All News for Today
Supporting telecom band frequencies from 950–2,150 MHz, VAEQ-2150+ enables very fine attenuation slope control to linearize device over frequency. Units measure 0.394 x 0.394 x 0.150 in. and consume low levels of power, with supply voltages from +3 to +5 Vdc at 15 mA max and control voltages from 0 to +5 Vdc at 10 mA max. IP3 of +55 dBm and typ deviation from linear loss of ±0.1 dB at +3 V supply and ±0.05 dB at +5 V supply minimize signal and power distortion over full passband. This story is related to the following:Voltage Variable Equalizers | Telecommunications Integrated Circuits |
Tags: variable
voltage
adjustable
slope
LED Drivers target variable voltage LED lights.
2013-05-21 14:33:48| Industrial Newsroom - All News for Today
Featuring constant current design with buck-boost topology, 10.8 W Model GP-LD10-30C and 17.5 W Model GP-LD15-24C have auto input voltage detectors for 12 or 24 V input. Reverse Protection prevents damage caused by accidentally connecting power lines in reverse by automatically disconnecting current. With IP65 design, drivers are protected from ingress of dust and water. Units operate at temperatures from -20 to 40°C at full load with efficiency greater than 84%. This story is related to the following:LED Drivers |
Tags: led
target
variable
lights