je.st
news
Tag: relay
Industrial USB Relay Board operates in hostile environments.
2015-03-30 14:31:05| Industrial Newsroom - All News for Today
Supporting multi-drop operation, IA-3128S-U2i features 24 relays rated at 5 A @ 30 Vdc and 250 Vac. Solely wired, 24 isolated digital inputs are rated at voltage isolation of 2,500 V RMS and operation current starting at 2 mA. USB port is Isolated from host computer to avoid EMI/RFI factory floor noise, and relay contacts are protected by on-board voltage suppressors. Of 24 digital inputs, two may be used as Event Counting inputs. All digital inputs include programmable digital filter.
Tags: board
industrial
usb
operates
Two-Channel Adaptive IF Relay XMC aids signal manipulation.
2015-03-26 13:31:08| Industrial Newsroom - All News for Today
Preconfigured with IP functions for DDC, DUC, DMA transfers, and digital summation, Cobalt® Model 71624 with Virtex-6 FPGA accepts 2 IF analog input channels, modifies up to 34 signals, and delivers them to 2 analog IF outputs. Any signal within each IF band can be independently enabled/disabled and changed in frequency/amplitude. Functions include signal drop/add/replace, frequency shifting/hopping, amplitude equalization, and bandwidth consolidation.
Tags: aids
signal
manipulation
relay
Pentek Introduces Dual Channel Adaptive IF Relay XMC For Commercial And Military Communications
2015-03-24 05:16:31| rfglobalnet News Articles
Pentek, Inc., recently introduced the newest member of its Cobalt line of XMCs (Switched Mezzanine Cards): the Model 71624 dual channel, 34 signal, adaptive IF (Intermediate Frequency) relay XMC with a Virtex-6 FPGA.
Tags: commercial
communications
channel
military
GPS-Synchronized Current Interrupter includes built-in relay.
2015-03-19 13:31:06| Industrial Newsroom - All News for Today
Powered from AC or DC source, MicroMax GPS350 integrates Normally Closed AC/DC solid state relay that can interrupt up to 60 A with on/off cycles of less than 4 sec, and 80 A with 4-sec cycles or longer. Relay also provides voltage suppression which absorbs inductive energy released during on/off switching. Supplied in hardened enclosure for extreme conditions, MicroMax GPS350 can be programmed using built-in keypad or via USB. Unit functions in continuous, daily, dated, and interference modes.
Tags: current
includes
relay
builtin
High-Speed Relay leverages 87L-over-Ethernet feature.
2015-03-16 13:31:07| Industrial Newsroom - All News for Today
SEL-411L supports data exchange over Ethernet network to provide line current differential (87L) protection for transmission lines with up to 4 terminals. High-speed transmission line differential, distance, and current protection relay provides 1- and 3-pole tripping and reclosing with synchronism check, circuit breaker monitoring, breaker failure protection, and series-compensated line protection logic. Traveling wave fault location option can pinpoint location of fault within tower span.
Tags: feature
relay
highspeed
leverages
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] next »