je.st

Home › testers

Tag: testers

Deadweight Testers calibrate multiple pressure devices.

2013-10-18 14:30:13| Industrial Newsroom - All News for Today

Suitable for calibrating pressure transducers, transmitters, and gauges, P3100 Hydraulic Deadweight Testers include Models P3125XT-BAR, P3125XT-KGCM2, and P3125XT-MPA, which measure from 1–1,200 bar, 1–1,200 kgf/cm², and 1–120 MPa, respectively. Supplied with detachable lid for portability, all models include accredited calibration report; weight mass details; M14 x 1.5, M20 x 1.5, 1/8 in., ¼ in., 3/8 in., and ½ in. NPT and BSP female adaptors; operating fluid; and spare seals. This story is related to the following:Deadweight Testers |

Tags: multiple pressure devices testers

Clamp-On Resistance Testers help prevent rise in voltage.

2013-09-19 14:31:48| Industrial Newsroom - All News for Today

Safety rated to CAT IV 600 V, DET14C and DET24C help prevent rise in voltage caused by fault current, surges, and lightning strikes in earth/ground systems. Interlocking teeth promote reliability, while flat core ends help prevent dirt build up and ensure measurement integrity. Able to measure ground resistance from 0.05–1,500 Ω and true RMS ground leakage current up to 35 A, elliptical testers can clamp round cables up to 37 mm dia and earth tapes/straps up to 50 mm wide. This story is related to the following:Resistance Testers |

Tags: prevent rise resistance voltage

Circuit Testers support diverse range of technologies.

2013-09-10 14:31:32| Industrial Newsroom - All News for Today

Comprising V8, M4, L4, and H4 testers, Pilot 4D integrates hardware and software capabilities suited for testing miniaturized circuits with high component density. Design ensures accessibility, even to hard-to reach nets, and leaves no visible marks on tested circuit. Offered with VIVA v3.0 software, solutions enable application of multiple test and inspection techniques. Platform provides electrical and thermal test capabilities as well as onboard digital programming of complex components. This story is related to the following:Circuit Testers

Tags: support range technologies diverse

High Power LED Reliability Testers are LM-80 qualified.

2013-09-05 14:30:34| Industrial Newsroom - All News for Today

Self-contained HyrdoTower has up to 4 independently controlled thermal platforms for elevating and controlling temperatures of LEDs from 55 to 105°C for reliability testing. Modular design allows independent, concurrent temperature control for 4 separate purposes. HydroPac II offers 2 test positions and accommodates power loads up to 3,000 W, and HydroPac IV offers 2 independently controlled zones and up to 4 test positions and handles up to 6,000 W. Both have 35 to 85°C (105°C optional) range. This story is related to the following:Test and Measuring InstrumentsLED Products | Test Systems | Electric Test Equipment |

Tags: high power led qualified