je.st
news
Tag: performance simulation
Performance Simulation Engineer
2017-07-05 14:18:19| Space-careers.com Jobs RSS
Summary Experienced Engineer to support the development of new optical and topographic instruments onsite at ESTEC for Telespazio VEGA. Objective To provide support in preparation for the commissioning phase CP which aims at validating the instruments and products. Responsibilities Duties HW and SW infrastructure has to be established to assess and simulate the optical and the topographic instruments. This infrastructure will consist of instrument simulators SPS and prototype Ground Segment processors GPP, provided through the Industrial consortium, plus additional tools necessary to perform commissioning tasks for geolocation, coregistration, storage of products, etc, which need to be identified and made available by the Agency. On top of the HWSW infrastructure, test procedures shall be developed, which prepare the activities defined to be executed during the CP. This shall include means to react in a flexible way to contingencies. Preparation of scenarios, rehearsal and replanning of activities are foreseen as well. Duties will include but are not limited to Operate and control the instrument simulators and data processors HW SW infrastructure, including task preparation in the perspective of rehearsalscommissioning activities Generation of instruments simulated Packets using instrument simulators SPS Generation of Optical and Topography products using processors GPP Analysis of results on packet level visavis a defined success criteria Analysis of SW anomalies Support the preparation and execution of the Ground System Validation GSV Support to specifications of expected anomaly corrections and MMI improvements Implement the nominal and contingency test procedures for the execution of the activities defined in the CP tasks During CP, being responsible for the execution of the test procedures Support the preparation and execution of the handover process between development and operations. Qualifications Experience Minimum of MSc or equivalent qualification in qualification in related field Knowledge in Satellite environment, Ground System and remote sensing in general is required Hands on experience of optical payload simulators and processors, such as ENVISATMERIS or SPOT mandatory, topography payload, such as JASON, Cryosat optional Candidates shall demonstrate good familiarity with computer programs such as MATLAB and other libraries Familiarity with UML In the field of System Management, knowledge of operation system Linux and Windows mandatory, and Unix optional Development environments Qualities Be able to function as part of a team A proactive and flexible attitude will be required An ability to work independently and to establish good working relations Further Details All roles within Telespazio VEGA have a defined closing date, however if a successful candidate is found before the advert expires the role will be closed early. We would therefore advise any candidate to apply as early as possible to avoid disappointment. Closing Date for applications is Thursday 20th 2017 Location of the position is ESTEC, Noordwijk, The Netherlands Benefits Competitive Package Security In line with Asylum Immigration Legislation, all applicants must be eligible to live and work in the EU. Documented evidence of eligibility will be required from candidates as part of the recruitment process. Furthermore, in view of the nature of the work the company is in, all potential employees will undergo stringent reference and identity checks.
Tags: performance
engineer
simulation
performance simulation
Performance Simulation Engineer
2017-06-29 00:10:15| Space-careers.com Jobs RSS
We are looking to further enhance our team by adding a Performance Simulation Engineer You will be based at our clients premises in Noordwijk, Netherlands. In this large European Agency you will find an excellent and modern working environment with challenging tasks and responsibilities. Your Tasks Include In preparation for the commissioning phase CP that aims to validate the instruments and products, a HW and SW infrastructure has to be established to assess and simulate the optical and the topographic instruments. This infrastructure will consist of instrument simulators SPS and prototype Ground Segment processors GPP, provided through the Industrial consortium, plus additional tools necessary to perform commissioning tasks for geolocation, coregistration, storage of products, etc., which need to be identified and made available by the Agency. As well as the HWSW infrastructure test procedures shall be developed to prepare the activities defined to be executed during the CP. This shall include means to react in a flexible way to contingencies. Preparation of scenarios, rehearsal and replanning of activities are foreseen as well. In particular the tasks include Operate and control the instrument simulators and data processors HW SW infrastructure, including task preparation in the perspective of rehearsalscommissioning activities Generation of instruments simulated Packets using instrument simulators SPS Generation of Optical and Topography products using processors GPP Analysis of results on packet level visavis a defined success criteria Analysis of SW anomalies Support the preparation and execution of the Ground System Validation GSV Support to specifications of expected anomaly corrections and MMI improvements Implement the nominal and contingency test procedures for the execution of the activities defined in the CP tasks During CP, being responsible for the execution of the test procedures Support the preparation and execution of the handover process between development and operations Your Profile Applicants should have PhD or MSc Engineering from a recognised Institution of secondary studies or equivalent At least 4 years of previous relevant working experience in the field Knowledge in Satellite environment, Ground System and remote sensing in general is required First hand experience of Optical payload simulators and processors, such as ENVISATMERIS or SPOT mandatory Topography payload, such as JASON, Cryosat optional Candidates shall demonstrate good familiarity with computer programs such as MATLAB and other libraries Familiarity with UML In the field of System Management, knowledge of operation system Linux and Windows mandatory, and Unix optional Development environments The candidate should have good interpersonal communication skills and high motivation to work in a multidisciplinary and international environment with confidence and autonomy. Fluency in the English language spoken and written knowledge of other languages is an asset. Candidates must be eligible to work in the EU REFERENCE ATVY877567 LOCATION Noordwijk, Netherlands CONTACT recruitmoltek.net CLOSING DATE 20th July 2017 MOLTEK has been serving the space and aerospace industries since 1995, providing international consultancy services for a wide variety of clients from private and public corporations to national and international authorities and agencies. For more detailed information about MOLTEK go to www.moltek.com
Tags: performance
engineer
simulation
performance simulation
Performance Simulation Engineer
2017-06-28 10:10:22| Space-careers.com Jobs RSS
In preparation for the commissioning phase CP which aims at validating the instruments and products, a HW and SW infrastructure has to be established to assess and simulate the optical and the topographic instruments. This infrastructure will consist of instrument simulators SPS and prototype Ground Segment processors GPP, provided through the Industrial consortium, plus additional tools necessary to perform commissioning tasks for geolocation, coregistration, storage of products, etc, which need to be identified and made available by the Agency. On top of the HWSW infrastructure, test procedures shall be developed, which prepare the activities defined to be executed during the CP. This shall include means to react in a flexible way to contingencies. Tasks and Activities The scope of work will include You will be operating and controlling the instrument simulators and data processors HW SW infrastructure, including task preparation in the perspective of rehearsalscommissioning activities Generation of instruments simulated Packets using instrument simulators SPS Generation of Optical and Topography products using processors GPP You will be analyzing the results on packet level visavis a defined success criteria You will be analyzing SW anomalies You will be supporting the preparation and execution of the Ground System Validation GSV You will be supporting to specifications of expected anomaly corrections and MMI improvements You will be implementing the nominal and contingency test procedures for the execution of the activities defined in the CP tasks During the commissioning phase, you will be responsible for the execution of the test procedures You will be supporting the preparation and execution of the handover process between development and operations. Skills and Experience The following skills and experience are mandatory You have a PhD or Msc Engineering from a recognised Institution of secondary studies University, Ecole suprieure, etc. or equivalent. You have knowledge in Satellite environment, Ground System and remote sensing in general. You have a first experience of optical payload simulators and processors, such as ENVISATMERIS or SPOT mandatory, topography payload, such as JASON, Cryosat optional You are able to demonstrate good familiarity with computer programs such as MATLAB and other libraries. You are familiar with UML. In the field of System Management, you have knowledge of operation system Linux and Windows mandatory, and Unix optional. Development environments You are fluent in the English language spoken and written knowledge of other languages is an asset. How to Apply Looking to take your career to the next level? Interested applicants should submit their CV and Cover Letter to RHEAs Recruitment team at careersrheagroup.com no later than 19072017. Preference will be given to candidates eligible for an EU or national personal security clearance at the level of SECRET or above. About RHEA Group RHEA Group is a leading engineering consultancy firm with demonstrated expertise in space, system and secure software solutions. We attract skilled engineers, scientists and management professionals and offer a range of exciting career paths working alongside clients such as the European Space Agency, the European GNSS Agency, EUMETSAT and NATO.
Tags: performance
engineer
simulation
performance simulation
Performance Simulation Engineer
2017-06-27 15:11:41| Space-careers.com Jobs RSS
ACS is looking for a Performance Simulation Engineer. ACS has almost 40 years experience in delivering solutions for Earth Observation satellites Ground Segments. Based in Rome, Italy and in Darmstadt, Germany, we delivered systems currently in operation in 20 countries worldwide and have a long record of successful projects carried out for ESA, EUMETSAT, EMSA and many other Space Agencies and Research Centres. ACS offers pleasant, international working environment at customer site very competitive salary attractive benefit package tailored on specific exigencies training and personal growth within ACS group. Tasks Operate and control the instrument simulators and data processors HW SW infrastructure, including task preparation in the perspective of rehearsalscommissioning activities Generation of instruments simulated Packets using instrument simulators SPS Generation of Optical and Topography products using processors GPP Analysis of results on packet level visavis a defined success criteria Analysis of SW anomalies Support the preparation and execution of the Ground System Validation GSV Support to specifications of expected anomaly corrections and MMI improvements Implement the nominal and contingency test procedures for the execution of the activities defined in the CP tasks During CP, being responsible for the execution of the test procedures Support the preparation and execution of the handover process between development and operations. Mandatory requirements University degree master in Engineering or Physics Knowledge in Satellite environment, Ground System and remote sensing in general is required. First experience of optical payload simulators and processors, such as ENVISATMERIS or SPOT mandatory, topography payload, such as JASON, Cryosat optional Candidates shall demonstrate good familiarity with computer programs such as MATLAB and other libraries Familiarity with UML In the field of System Management, knowledge of operation system Linux and Windows mandatory, and Unix optional Development environments Fluent in the English language spoken and written knowledge of other languages is an asset EU national or valid work permit for Germany CV in Europass format
Tags: performance
engineer
simulation
performance simulation
Optical Payload Performance Simulation Engineer
2017-06-26 17:11:13| Space-careers.com Jobs RSS
HE Space is a successful international space company. For over 30 years, we have been supporting our customers with qualified experts in the field of engineering, science and administration. We are currently looking for an Optical Payload Performance Simulation Engineer to support our customer in Germany. Optical Payload Performance Simulation Engineer Key Tasks and Responsibilities As part of the Ground System Definition and Verification Office, you will have the following responsibilities Operate and control the instrument simulators and data processors HW SW infrastructure, including task preparation in the perspective of rehearsalscommissioning activities Generation of instruments simulated Packets using instrument simulators SPS Generation of Optical and Topography products using processors GPP Analysis of results on packet level visavis a defined success criteria Analysis of SW anomalies Support the preparation and execution of the Ground System Validation GSV Support to specifications of expected anomaly corrections and MMI improvements Implement the nominal and contingency test procedures for the execution of the activities defined in the CP tasks During CP, being responsible for the execution of the test procedures Support the preparation and execution of the handover process between development and operations. Skills Experience You will have the following qualifications and relevant experience Masters degree in Engineering or equivalent qualification Knowledge in Satellite environment, Ground System and remote sensing in general is required Experience in optical payload simulators and processors, such as ENVISATMERIS or SPOT is mandatory Experience in topography payload, such as JASON, Cryosat is highly advantageous Good familiarity with computer programs such as MATLAB and other libraries Familiarity with UML In the field of System Management, knowledge of operation system Linux and Windows is mandatory, knowledge if Unix is advantageous Development environments Fluency in English is mandatory knowledge of another European language is an advantage. This job is located in Noordwijk. We welcome applicants who are available from August 2017 or as soon as possible thereafter. If you think you have what it takes for this job, please send us your CV together with a letter of motivation both in English and in Word to Ms Elisa Manfreda at jobshespace.com, quoting job NLHP3530 before 16Jul17. An exciting and dynamic international working environment awaits you!
Tags: performance
optical
engineer
simulation