je.st
news
Tag: emi
High Voltage Vibration Sensors resist EMI.
2015-03-03 14:31:07| Industrial Newsroom - All News for Today
Operating in harsh electromagnetic environments without signal loss or delays, HV Series includes 100 and 500 mV/g models for seismic monitoring that measure ultra-low levels down to 0.1 Hz. Sensing element is isolated from sensor base and casing to offset effect of high voltage and EMI often found in wind turbines and VFD/SCR controllers. For long-term stability, top-exit sensors have ceramic housings and hermetic sealing that provide isolation up to 6,000 V.
Tags: high
voltage
resist
sensors
EMI Suppression Filters offer high attenuation rates.
2015-01-26 14:31:26| Industrial Newsroom - All News for Today
Employing exclusive circuit configuration combining capacitors and ferrite beads, BNX026/27/28/29 Series comprises LC combined-type EMI suppression filters offering attenuation rates of 35 dB or more over wide frequency range of 15 kHz to 1 GHz. Surface mount DC line noise filters with current rating of 15 A are suited for power supply circuits susceptible to low-frequency-band noise, while parts with voltage rating of 50 V are suitable for automotive applications.
Tags: high
offer
rates
filters
Receiver with 3.6 GHz Max Range aids EMI compliance testing.
2015-01-13 14:30:48| Industrial Newsroom - All News for Today
Built on upgradeable platform, N9038A MXE EMI receiver enables EMI/EMC specialists to diagnose noncompliant emissions and help designers pinpoint root causes. Frequency range spans 20 Hz to 3.6 GHz, and available enhancements include CPU, memory, disk drives, and I/O ports. Additions of functionality and measurement applications are also supported. Receiver complies with CISPR 16-1-1 and MIL-STD-461 requirements for commercial products and military systems, respectively.
EMI Shielding Gaskets suit large enclosures.
2015-01-08 14:30:49| Industrial Newsroom - All News for Today
Provided in 0.125 in. and 0.250 in. thicknesses, Combination EMI Shielding Gaskets are fabricated from closed cell silicone sponge, silicone foam, and fluorosilicone sponge with edge bonded knitted monel wires. Gaskets are thicker and softer than filled conductive rubber EMI gaskets, making them suited for large enclosures requiring environmental gaskets and EMI shielding. Pressure sensitive adhesive aids installation, while monel mesh offers corrosion resistance and ability to resist oxidation.
Tags: large
suit
emi
enclosures
AC-DC Converters feature built-in EMI filtering.
2014-12-09 14:30:52| Industrial Newsroom - All News for Today
Measuring 1.33 x 0.87 x 0.71 in., regulated 1 Watt AME1-AZ, 2 Watt AME2-AZ, and 3 Watt AME3-AZ offer standard output voltages of 3.3, 5, 12, 15, and 24 Vdc with universal input of 90–305 Vac, 47–440 Hz, or 130–430 Vdc. Units include input/output isolation of 3,000 Vac as well as over load, over voltage, and short circuit protections. Operating from -40 to 80°C, converters are suited for smart lighting controls, building automation, test equipment, water dispensers, and electrical metering.
Tags: feature
filtering
emi
converters
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] next »