je.st
news
Tag: resistors
Thick Film Chip Resistors suit high-power RF applications.
2014-01-24 14:32:32| Industrial Newsroom - All News for Today
Offered in 1206 case size, RCP Series features power rating of 1 W at +70°C with standard board mount and up to 11 W with active temperature control. Devices offer resistance range from 10 Ω to 2 kΩ, tolerance of ±2% and ±5%, and TCR of ±100 ppm/°C. Manufactured with stable thick film resistive element on aluminum nitride substrate and epoxy encapsulation, surface-mount resistors operate from -55 to +155°C, making them suited for aerospace, military, industrial, and telecom systems. This story is related to the following:Thick Film Resistors | Chip Resistors | Resistors | Military Specification Resistors | Film Resistors
Tags: film
applications
suit
chip
Thin Film Chip Resistors withstand harsh environments.
2014-01-21 14:29:01| Industrial Newsroom - All News for Today
Meeting high frequency needs, Susumu's RG Series is capable of maintaining its resistant value with minimal noise into GHz range. Units feature failure rate of 0.01 FIT and are exceptionally tolerant to extreme environments, including sulfur and vibration. Applications include power supplies; medical electronics; test/measurement equipment; automotive, automation, and production equipment; and military, aerospace, and aviation equipment. This story is related to the following:Thin Film Resistors | High Frequency Resistors
Tags: film
thin
chip
environments
Dynamic Braking Resistors meet UL and CSA standards.
2013-12-17 14:31:32| Industrial Newsroom - All News for Today
Designed to meet UL508A and CSA C22.2 No. 14 safety standards, Dynamic Braking Resistors work in concert with company’s Dynamic Braking Units to dissipate regenerative energy generated from motors controlled by IMPULSE® brand variable frequency drives. Units are designed specifically for crane and hoist duty cycles and are available in grid, wire wound, or edge wound resistor coils mounted in ventilated enclosures. This story is related to the following:Dynamic Braking Resistors | Edgewound Resistors | Grid Resistors
Tags: meet
standards
dynamic
csa
Braking/Crowbar Resistors have compact and modular design.
2013-12-12 14:31:31| Industrial Newsroom - All News for Today
To meet demands of alternative energy and other heavy-duty applications, Vishay Draloric ULDCR stainless steel braking/crowbar resistors feature pulse energy capability up to 3.46 MJ and pulse current capability up to 12 kA. Higher pulse load capacity versions, built to specifications, are available. For single pulse, devices feature temperature rise below 350°C typ. Resistance ranges from 1 mΩ to several ohms, and self-supported design features saltwater-resistant component materials. This story is related to the following:Braking Resistors |
Tags: design
compact
modular
resistors
Flip Chip COTS Resistors offer resistance down to 5 ohms.
2013-12-11 14:29:45| Industrial Newsroom - All News for Today
Available in 5 chip sizes from 0805–2512, VFCP Series Bulk Metal® Z-Foil Resistors offer power ratings up to 600 mW at +70°C and resistance range from 5 Ω to 125 kΩ with resistance tolerance to ±0.01%. Units feature ultra-low TCR of ±0.05 ppm/°C nominal and ±0.2 ppm/°C typical with load life stability of ±0.005% at 70°C for 2,000 hours at rated power. Featuring non-inductive, non-capacitive design, devices are suited for alternative energy, RTD, Li-ion battery, and smart grid applications. This story is related to the following:Metal Foil Resistors |
Tags: offer
resistance
chip
flip
Sites : [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] next »