je.st
news
Tag: lowprofile
Linear Low-Profile 52 W LED Fixture has explosionproof design.
2015-06-08 14:31:06| Industrial Newsroom - All News for Today
Producing 6,760 lm while drawing 52 W, 5 in. wide EPL-LP-24-LED employs 2 offset LED assemblies to provide 100° horizontal beam spread and 140° vertical beam spread. LED assembly is protected behind tempered borosilicate glass tube, which is protected by aluminum wire guard, and copper-free aluminum alloy body is powder coated. Operating from 100–277 Vac, fixture carries T5 temperature rating as well as paint spray booth, ATEX, and IECEx certifications.
Tags: design
led
linear
fixture
Top-Actuated SPST NO Switches have low-profile, SMT design.
2015-05-15 14:31:09| Industrial Newsroom - All News for Today
With 3.0 x 2.0 mm footprint and 0.58 mm board-mounted profile, KXT Series includes momentary action switches suited for applications, such as wearable electronics and portable devices, requiring ultra-miniature components. Travel distance is 0.13 mm ±0.05 mm, and available operating forces include 100 gf (±30), 180 gf (±50), and 240 gf (±70). Rated for 12 Vdc/50 mA and -30 to +85°C operation, switches feature operating life of 300,000 cycles.
Tags: design
switches
smt
spst
LED Roadway Fixture has low-profile design and uniform output.
2015-04-29 14:31:07| Industrial Newsroom - All News for Today
Featuring Luxeon 120 LED module providing 400 W and 36,000 lm, 35.5 x 15 x 7 in. Razar G complements contemporary architectural trends toward clean, minimalist appearance. Optical housing is 2.5 in. deep, reducing visual conflict with surrounding architecture, and available distribution patterns include Type II, III, and IV as well as Type V Sq. Rotatable LED modules (in 90° increments) and pole mounting configurations, from single- to quad-head, allow complete coverage of any site.
Tags: design
led
output
uniform
Fast Recovery Rectifiers feature low-profile design.
2015-04-17 14:31:08| Industrial Newsroom - All News for Today
Housed in low-profile SMPD package measuring less than 1.7 mm in height, 10–30 A FRED Pt® Hyperfast and Ultrafast Recovery Rectifiers minimize switching losses and over-dissipation in automotive and telecom applications while providing high-density alternative to TO-263 package. Devices offer reverse voltages of 200 and 600 V, reverse recovery time down to 25 ns, and typical forward voltage drop down to 0.75 V in single- and dual-die configurations.
Tags: design
fast
feature
recovery
Welding Goggles feature extreme low-profile design.
2015-04-10 14:31:07| Industrial Newsroom - All News for Today
With low profile design, Weld-Mask™ Auto-Darkening Goggles allow welding in restricted spaces where traditional helmets would be limited. Tight fitting eye covering blocks out light from welding or cutting arc, while flame-retardant head cover provides protection against UV/IR rays and light spatter. Available with shade numbers of 3, 5, 7, 9, 11, and 13, goggles provide 1,000 hr of battery life. Two sensors and switching speed of 1/15,000 seconds ensure consistent protection.
Tags: design
feature
extreme
welding
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] next »