Anti-Sag Meter<br />
<br />
Coatings applied on non-horizontal surfaces will sag due to gravity. Sag resistance is a factor of the composition and viscosity of the coating, as well as the applied thickness.<br />
<br />
The applicator is a U-shaped drawdown bar with a series of 1/4 inch (6.4 mm) wide notches of varying clearances, spaced 1/16 inch (1.6 mm) apart. It is 5 inches (127 mm) wide and produces a total film width of 3-3/8 inches (86 mm).<br />
<br />
When a drawdown is made, a series ...This story is related to the following:Test and Measuring InstrumentsSearch for suppliers of: Coating Thickness Gages