Applied by dipping, brushing, or spraying, Aremco-Seal™ 617 single-part, water-based, glass coating is used to produce hermetic seals in porous ceramics and refractories in electrical and high-vacuum applications. Cure is accomplished by drying 200°F for 30 min, 350°F for 60 min, and final curing at 1,650°F for 3–5 min. Odorless sealant cleans up prior to curing with warm water and does not contain any VOCs. No outgassing will occur upon curing or during operation.
This story is related to the following:Adhesives and SealantsSearch for suppliers of: Sealants |