The OPS+ effectively protects the robot and end effector from being damaged during a crash. The OPS+ will allow the EOAT to deflect and comply in the event of a crash. At the same time, a mechanical switch will detect the deflection and send a signal to the robot controller, and then an E-stop can be issued. This protects the system from the damage that would have otherwise occurred without the sensor.<br />
<br />
After a crash situation, the OPS+ will be deflected off center. But it can ...This story is related to the following:Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving TechnologiesRobotic Grippers | Proximity Sensors | Load & Force Sensors | Assembly Robots |