je.st
news
Tag: operational amplifiers
Operational Amplifiers provide rail-to-rail outputs.
2014-09-10 14:31:03| Industrial Newsroom - All News for Today
Minimizing power dissipation in high channel count applications, XR1008/XR2008 single/dual amplifiers offer 75 MHz bandwidth while consuming 505 µA supply current, while XR1009/XR2009 provide 35 MHz at 208 µA. All 4 devices support inputs that extend 300 mV beyond negative supply voltage and provide rail-to-rail outputs. Slew rates and input voltage noise are specified at 50 V/µs and 12 nV/√Hz for Models XR1008/XR2008 and 27 V/µs and 21 nV/√Hz for Models XR1009/XR2009. This story is related to the following:Operational Amplifiers
Tags: provide
operational
outputs
amplifiers
Rail-To-Rail Operational Amplifiers: MCP6231/1R/1U/2/4
2014-08-21 07:33:29| rfglobalnet Home Page
The Microchip Technology Inc. MCP6231/1R/1U/2/4operational amplifiers (op amps) provide widebandwidth for the quiescent current. The MCP6231/1R/1U/2/4 family has a 300 kHz gain bandwidth productand 65°C (typical) phase margin. This family operatesfrom a single supply voltage as low as 1.8V, whiledrawing 20μA (typical) quiescent current. In addition,the MCP6231/1R/1U/2/4 family supports rail-to-railinput and output swing, with a common mode inputvoltage range of VDD + 300mV to VSS– 300mV.These op amps are designed in one of Microchip’sadvanced CMOS processes.
Tags: operational
amplifiers
operational amplifiers
amplifiers operational
Rail-To-Rail Operational Amplifiers: MCP6231/1R/1U/2/4 Datasheet
2014-08-21 07:17:23| rfglobalnet Downloads
The Microchip Technology Inc. MCP6231/1R/1U/2/4operational amplifiers (op amps) provide widebandwidth for the quiescent current.
Tags: operational
amplifiers
datasheet
operational amplifiers
Operational Amplifiers boost sensor signals.
2014-02-20 14:31:07| Industrial Newsroom - All News for Today
Designed to amplify signals from motion sensors such as accelerometers and gyroscopes, Models BD5291G and BD5291FVE utilize analog technology, enabling input/output full-swing operation at only 1.7 V. Low input offset voltage combined with high common-mode rejection ratio of 70 dB min makes it possible to amplify small signals with accuracy. Typical applications include smartphones, tablets, portable CD/DVD players, and handheld gaming equipment. This story is related to the following:Operational Amplifiers |
Tags: operational
signals
boost
sensor
Operational Amplifiers drive up to 4 video loads.
2013-11-04 14:32:18| Industrial Newsroom - All News for Today
Offering pin compatible replacements for Analog Devices' 110 MHz AD8051, AD8052 and 150 MHz AD8054 single, dual, and quad devices, respectively, Models XR8051, XR8052 and XR8054 are suited for video distribution and surveillance systems. Devices feature 175 MHz -3 dB unity gain bandwidth, 50 MHz full power bandwidth, and 190 V/µs slew rate. They can accommodate general-purpose, high-speed applications where dual supplies up to ±6 V or single supplies from +2.7 to +12 V are required. This story is related to the following:Operational Amplifiers |
Tags: video
drive
operational
loads
Sites : [1]