je.st
news
Tag: signal
Flashing Signal Lights operate in hazardous areas.
2013-12-13 14:28:09| Industrial Newsroom - All News for Today
Operating from -55 to +70°C and flashing once/sec, FX15 Series features corrosion-resistant, glass-reinforced polyester enclosure that provides IP66/IP67 protection. Stainless steel lens guard protects flame-retardant polycarbonate lens. Fresnel lens, which covers well glass and houses xenon tube, produces flash energy of 5 Joules, ensuring luminous intensity of 49 CD for clear vision. ATEX- and IECEx-certified, beacons are suited for marine use, oil and gas sector, and skid packages. This story is related to the following:Signaling Lights | Flashing Lights | Beacons |
Tags: areas
operate
signal
lights
New traffic signal at west end of Sellwood Bridge
2013-12-12 18:11:39| PortlandOnline
A new traffic signal will be activated at the west end of the Sellwood Bridge before the afternoon commute on Wednesday, December 11. The work will require lane closures in the area between 9 a.m. and 4 p.m. That day the northbound ramp of Highway 43 that passes under the bridge will close permanently so that work can begin on the east half of the new interchange. Traffic on Highway 43 and the bridge will pass through the new signal until the new two-level interchange opens in fall 2015.
Using the IQC5000A and Spectro-X Software for Signal Capture and Analysis: A Satcom Example
2013-12-10 15:14:42| rfglobalnet Home Page
This application note discusses how a spectrum capture and playback system can be used to predict and measure bandwidth, and its advantages over traditional signal analyzers for the same application.
Tags: software
example
analysis
signal
Australia switches off final analogue free-to-air TV signal
2013-12-10 09:00:40| Digital TV News
Australia has completed its switchover from analog to digital-only television. The last of Australia's analogue free-to-air television signals were switched off in Melbourne and communities in Remote Central and Eastern Australia.
Tags: final
australia
signal
switches
Microwave Analog Signal Generators feature low phase noise.
2013-12-09 14:28:56| Industrial Newsroom - All News for Today
Featuring 2 RU design, Model N5183B MXG features phase noise of less than -124 dBc/Hz and -75 dBc spurious, enabling module- and system-level testing up to 40 GHz. Unit also accelerates calibration of complex systems with switching speed of less than 600 µs. Model N5173B EXG, combining output power of +20 dBm at 20 GHz with low harmonics of less than -55 dBc, is suited for characterization of broadband microwave components such as filters and amplifiers. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - MOBILE BANNER ADSearch for suppliers of: Signal Generators |
Tags: low
feature
phase
signal
Sites : [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] next »