je.st

Home › solvent

Tag: solvent

Positive Displacement Proportioner cuts solvent use.

2013-09-30 14:30:13| Industrial Newsroom - All News for Today

Equipped with 2 or 4 dosing pumps, ProMix PD2K can manage up to 30 colors and 4 catalysts, and produces mix ratios within 1% accuracy. Since system mixes materials physically closer to gun, flush zone is smaller than traditional systems, allowing end-users to use less paint while accelerating color changes. ProMix PD2K works well for short pot life materials, is compatible with acid-based materials, and enables users to proportion both epoxy and urethane with one system. This story is related to the following:Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving TechnologiesMachinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor AdVarnish Paint Pumps | Pumps | Proportioning Mixers | Mixing & Foaming Machinery | Liquid Mixers | Displacement Pumps

Tags: positive cuts displacement solvent

Positive Displacement Proportioner conserves solvent use, waste.

2013-09-17 14:30:29| Industrial Newsroom - All News for Today

By mixing material close to gun, ProMix PD2K minimizes flush zone size. This consequently enables use of less paint while also accelerating color changes. Also, amount of mixed material in system supports short pot life materials. Positive displacement technology produces mix ratios within 1% accuracy and lends to consistent pump performance. Also compatible with acid-based materials, proportioner can be equipped with 2 or 4 dosing pumps and manage up to 30 colors and 4 catalysts. This story is related to the following:Materials and Material Processing Sponsored by: Sealeze - Category SponsorProportioning & Metering Systems | Color, Dye, Ink & Paint Mixers |

Tags: positive waste displacement solvent

New Solvent Rub Standard Approved by ASTM Paint Committee

2013-08-15 06:00:00| Industrial Newsroom - All News for Today

ASTM D7835, Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine, was developed by Subcommittee D01.53 on Coil Coated Metal. It describes solvent rub technique that can be used in laboratory, field, or fabrication shop for assessing solvent resistance of organic coating that chemically/physically changes during curing process. D01 member Ted Best said use of this standard would not be limited to coil coating industry. This story is related to the following:Trade Associations

Tags: standard approved committee paint

EPA Reduces Regulatory Burden for Industrial Facilities Using Solvent Wipes

2013-07-23 06:00:00| Industrial Newsroom - All News for Today

EPA modified hazardous waste management regulations under Resource Conservation and Recovery Act to exclude solvent-contaminated wipes from hazardous waste regulations provided that businesses clean/dispose of them properly. Rule is based on EPA’s final risk analysis that concluded wipes contaminated with certain hazardous solvents do not pose significant risk to human health or environment when managed properly. EPA estimates that final rule will result in net savings of $21.7–27.8 ...This story is related to the following:Green & CleanSearch for suppliers of:

Tags: industrial facilities regulatory reduces