je.st
news
Tag: kw
Boulder Electric Vehicle demonstrates V2G electric trucks in three locations; 60 kW bi-directional
2013-09-13 22:30:16| Green Car Congress
Tags: locations
electric
vehicle
kw
Screw Compressors Range From 75 kw to 160 kw
2013-08-15 23:07:00| Chemical Processing
Gardner Denver has launched a completely new range of air-cooled, fixed and variable-speed, oil-free screw compressors that utilize two-stage air-end technology.
Rack-Mount 2U Power System features hot-pluggable 1 kW modules.
2013-06-25 14:28:24| Industrial Newsroom - All News for Today
Delivering 3 kW or 2 kW with N+1 redundancy, BAP 3K-CR2U/19-3 Series is built with 3 heavy-duty 1 kW BAP 65F DC/DC modules assembled on 2U x 19 in., rack-mount, stainless steel cradle. Mechanical features facilitate insertion of converter modules, and no motherboard is required. Each module accepts nominal input of 48, 72, 110, 125, or 250 Vdc and is available in several output configurations: 24 V/40 A, 48 V/20 A, or 125 Vdc/8 A. Modules typically deliver efficiencies of 90% at full load. This story is related to the following:Controls and ControllersSearch for suppliers of: DC Power Systems | Electronic Control Modules | Modules
Tags: system
power
features
modules
Laser Power Meter measures up to 30 kW.
2013-05-21 14:33:49| Industrial Newsroom - All News for Today
Featuring 74 mm aperture for large diameter beams, 30K-W Laser Power Meter measures YAG and fiber lasers in 800-2,000 nm range and CO2 lasers at 10.6 microns. Meter is based on thermopile technology. Reflective cone deflects laser beam onto inner circumference of sensor, minimizing power density to manageable levels. Created for material processing lasers used in metal cutting and welding, meter offers response time of less than 10 sec and can withstand max average power density up to 10 kW/cm². This story is related to the following:Communication Systems and EquipmentSearch for suppliers of: Laser Power Meters
Tags: power
measures
meter
laser
Open Terrain Racking System supports up to 50 KW.
2013-05-07 14:31:09| Industrial Newsroom - All News for Today
Consisting of pre-packaged versions of Sigma II open terrain photovoltaic substructure, Sigma II GO Kits feature inclination angle of 25° and are ready to be installed on ballast blocks or concrete piers. Units accept all 60-cell crystalline modules and are intended primarily for installations up to 50 KW. Supplied with Professional Engineer certification, Sigma II GO Kits are available in either low load, for up to 90 mph wind/0 psf snow, or high load for up to 120 mph wind/30 psf snow. This story is related to the following:Electronic Components and DevicesPhotovoltaic Systems & Equipment |