je.st
news
Tag: gbe
GbE Switches, Media Converter support high-bandwidth networks.
2016-03-15 13:31:05| Industrial Newsroom - All News for Today
With one SFP fiber port and one copper port, MCW-211-F1G-T1G unmanaged industrial Ethernet media converter connects legacy serial devices to Gigabit Ethernet (GbE) networks. Unmanaged Ethernet switches SDW-541-F1G-T4G and SDW-550-T5G offer 5 copper or one fiber plus 4 copper ports. Units support 100 Mbps or Gigabit Ethernet, with SDW-550-T5G also supporting 10 Mbps communications. Distances of up to 120 km can be achieved using Westermo pluggable 100 Mbit or Gigabit SFP transceivers.
Tags: support
media
networks
converter
Gearbox with MLG Support supports all 100 GbE media types.
2015-12-18 14:31:09| Industrial Newsroom - All News for Today
Manufactured with 28 nm lithography in 17 x 17 mm footprint, Alaska® C 88X5111 integrates Multilink Gearbox (MLG) functionality, enables 100 Gbps full duplex transmission, and performs all physical layer functions required for diverse media. Line interface complies with IEEE 802.3BJ and supports Reed Solomon Forward Error Correction (RS-FEC) function required for 100G-CR4, 100G-KR4, and 100G-SR4 operation as well as auto-negotiation and coefficient training protocol required by IEEE 802.3.
Tags: support
media
types
supports
Ethernet Switches drive enterprise adoption of 2.5 GbE.
2015-11-23 14:31:05| Industrial Newsroom - All News for Today
For wired enterprises, BCM56160 adds 2.5 GbE access point connections to 24- and 48-port Gigabit Ethernet form factors, integrates 10 Gigabit interfaces for fiber uplinks, and delivers double stacking bandwidth. For all-wireless office built primarily on Wi-Fi access points, BCM56060 is optimized for 802.11ac Wave 2 enterprise environments and provides multi-mode 1 GbE/2.5 GbE Ethernet interfaces with 10 Gigabit uplinks. Both switches are built on Broadcom's StrataXGS® architecture.
Tags: drive
enterprise
adoption
ethernet
Rugged GbE Switch Card is offered in 8-port version.
2015-09-18 14:31:08| Industrial Newsroom - All News for Today
Measuring 3.6 x 3.8 in., 8-port SWI-22-10 Gigabit Ethernet (GbE) switch card delivers Layer 2 fully managed network switch capable of Layer 3 static routing. This MIL-STD-810G-validated, SFF PCI/104-Express module also features RS-232 console port and support for Built-in-Test to detect system faults. Additionally, support for zeroize sanitize function lets users declassify product and erase configuration information. Carrier-grade GbE switching silicon and management software is included.
Tags: version
card
offered
switch
Ethernet and Converged Network Adapters support 10 GbE and OCP.
2015-03-18 13:31:08| Industrial Newsroom - All News for Today
OneConnect® OCe14104 and OCm14000-OCP are 4-port 10GbE PCIe and dual-port 10GbE Open Compute Project (OCP) form factor Ethernet and Converged Network Adapters (CNAs). OCm14000-OCP adapters provide such capabilities as Network Virtualization and Virtual Extensible LAN (VXLAN), Network Virtualization using Generic Routing Encapsulation (NVGRE), Single-Root I/O Virtualization (SR-IOV), and protocol support for RDMA over Converged Ethernet (RoCE) or block storage on Emulex OneConnect CNAs.
Tags: and
support
network
ethernet