je.st
news
Tag: acdc
AC-DC Power Supplies offer 135 different voltage ratings.
2013-10-16 14:31:42| Industrial Newsroom - All News for Today
Offered in rack and benchtop models, 1U Single-Output AC-DC Power Supplies span 1–135 Vdc voltage range with current ratings up to 40 A. Programmable 450 W units accommodate universal AC input voltage of 95–265 Vac, 49-420 Hz with active power factor correction of 0.99 to ensure operation in challenging environments and compliance with European EMC requirements. For added support, units are configurable with optional fixed auxiliary output of 3.3–125 Vdc, up to 180 W. This story is related to the following:Rack Mount Power Supplies | AC To DC Power Supplies
Tags: power
offer
supplies
ratings
AC/DC Power Supplies feature 3-phase, high voltage input.
2013-10-10 14:34:12| Industrial Newsroom - All News for Today
Operating from 480 Vac, 3-phase line input, 3 kW HVI 3K Series delivers any single output voltage from 24–600 Vdc. DC-input version, which accepts any voltage from 500–800 Vdc, is also available. Units are built with 3 internal power modules, each separated by redundancy diode, which allows multiple units to be connected in parallel to achieve higher output power or N+1 redundancy. Measuring 187 x 132 x 407 mm, power supplies are cooled by built-in fans. This story is related to the following:AC To DC Power Supplies | High Voltage Power Supplies
Tags: high
power
supplies
feature
AC/DC Power Supply features MTBF of 170,000 hours.
2013-10-08 14:30:53| Industrial Newsroom - All News for Today
Using active power factor correction, 150 W Model PFW 150-24 converts AC input voltage of 95–264 Vac to 24 Vdc. Typical line/load regulation is better than ±2% from 5% to full load. Isolated, floating point output can be grounded to either terminal, allowing for use in either positive or negative grounded systems, or may be left floating. Conformally coated to ensure immunity to shock, vibration, and moisture, industrial-grade power supply incorporates 4,300 Vdc input/output isolation. This story is related to the following:AC To DC Power Supplies |
Tags: power
features
hours
supply
Regulated AC/DC Converters power electrostatic precipitators.
2013-09-27 14:32:04| Industrial Newsroom - All News for Today
Available at 8/4 kV to 12/6 kV at 10, 20, 30, or 50 W of output power, AC line operated ESP Series addresses need for stand-alone module to power electrostatic precipitators operating in air or oil in higher-reliability, 24/7 applications. Modules have dual outputs to power ionizer and collector as well as fault monitor with isolated relay contacts. Along with fixed-frequency, low-stored-energy design, series is fully protected from application's harsh output characteristics. This story is related to the following:AC To DC Converters
Tags: power
regulated
converters
electrostatic
AC/DC Millivolt Data Logger features current clamp input.
2013-09-17 14:30:29| Industrial Newsroom - All News for Today
When used with current clamp, AC/DC Millivolt Data Logger measures and stores up to 127,232 AC and DC current readings over 0–1,000 A DC measurement range (0–723 A for AC). In Energy Monitoring mode, data is converted into power, cumulative energy, and cumulative cost, while AC and DC millivolt measurement mode allows for direct measurement of voltage up to 1 Vdc (700 mVac). Powered by 2 AA batteries, meter also includes 4 mm banana plug inputs and USB interface for setup and download of data. This story is related to the following:Data Loggers & Data Logging Equipment | Electric Meters | Electric Recording Meters
Tags: data
current
features
input
Sites : [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] next »