je.st
news
Tag: illumination
3D Flash LIDAR(TM) Camera uses Zephyr laser for illumination.
2013-08-15 14:30:47| Industrial Newsroom - All News for Today
Using eye-safe 1,570 nm wavelength Zephyr laser for illumination, TigerCub 3D camera streams real-time 3D range and intensity data, day and night, through dust, fog, and smoke. Non-mechanical solution features 128 x 128 focal plane array (InGaAs + CMOS) sensor engine and bayonet mount for lenses. Weighing <3 lb, solution supports Ethernet and CameraLink interfaces as well as operations up to 20 Hz (30 Hz possible). Dimensions, without lens, are 11 x 10 x 12 cm. This story is related to the following:RoboticsCameras |
Tags: flash
camera
laser
illumination
LED Pattern Projectors control illumination geometry.
2013-07-18 14:30:17| Industrial Newsroom - All News for Today
Used with any C-mount compatible imaging lens and negatively patterned 21 mm reticle, AI LED Pattern Projectors provide specific structured illumination geometries. Projectors may also be used without reticle, serving as adjustable spot lights. Available in Blue, Green, Red, and White light, units offer line, cross, stripe, grid, and edge patterns in variety of thicknesses. Applications include 3D reconstruction, visualization and mapping, profile management, and mechanical alignment. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - MOBILE BANNER ADSearch for suppliers of: Projectors | Photolithography Lamps
Tags: control
led
pattern
geometry
Industrial Ceiling Fan integrates LED illumination.
2013-06-12 14:34:36| Industrial Newsroom - All News for Today
Generating gentle air movement using 1–2 hp motors, Powerfoil® X cools large areas while illuminating work area below via integrated LED. Tempered glass lens minimizes glare, while LED delivers as much light as 400 W metal halide and covers entire diameter of fan while consuming <175 W. Design facilitates installation and ties directly into existing lighting grid to facilitate control, while integrated LED eliminates any need to rearrange lighting grids to avoid shadowing effect. This story is related to the following:HVACLED Products | Worker Cooling Fans | Ceiling Fans
Tags: industrial
led
fan
ceiling
Opal Glass Pendant provides warm white illumination.
2013-05-15 14:30:33| Industrial Newsroom - All News for Today
Designed with LED light source, Mirabel Pendant uses 5.6 W while delivering 375 lumens, typical CRI of 85, and color temperature of 3,000 K. Unit operates on low-voltage track and rail systems as well as canopy mount using Quick Adjust canopy. Measuring 10 ¼ in. in height and 6 11/16 in. wide, pendant is available in Brushed Nickel, Chrome, and Dark Bronze finishes. This story is related to the following:Pendant Type Lighting Fixtures |
Tags: white
glass
warm
pendant
Fiber Optic Illumination Platform increases available brightness.
2013-05-03 14:28:04| Industrial Newsroom - All News for Today
Suitable for architectural and signage applications, Recycling Light Technology (RLT™) increases brightness available to large core, single fibers by 3M and flexible, small diameter fiber bundles by Schott. Both are designed for side-emitting applications suitable for replacing neon tubes, with 50,000 hr lifetime of LEDs. Illumination platform has produced brightness improvements of up to 2.5X using white LEDs by Cree and is also suitable for use with multi-colored LED packages. This story is related to the following:Vision SystemsFiber Optic Illuminators | LED Products
Tags: increases
platform
fiber
optic
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] next »