je.st
news
Tag: transceiver
Transceiver Kit allows up to 4 IP devices over single cable.
2013-10-02 14:29:13| Industrial Newsroom - All News for Today
With eBridge™4SK Kit, 4 IP devices can replace single analog camera over legacy coax infrastructure. Kit includes eBridge4SPT transceiver with integral 4-port managed PoE+ switch that transmits IP data to head-end, and eBridge1SPR receiver that passes system power up coax over 1,500 ft without repeaters. Built-in IP management allows for remote camera/device reset, monitoring, and reporting via various IP protocols. Individual ports may be enabled or disabled as desired. This story is related to the following:Transceivers |
Transceiver Flash System includes built-in triggering.
2013-09-26 14:31:19| Industrial Newsroom - All News for Today
Incorporating radio transmitter and receiver functions, Mitros+ TTL Transceiver Flash enables photographers to control and fire remote compatible flashes in TTL or Manual modes, with no external triggers required. Users can control TTL EV adjustment of ±3 in 1/3 stops and manual power from full power to 1/128 in 1/3 stops. Unit also offers rotating and elevating flash head, 24–105 mm flash zoom, high-speed sync, second curtain sync, external battery port, and 3.5 mm sync port. This story is related to the following:Computer Hardware and PeripheralsRadio Transmitters | Photoflash Lamps |
Tags: system
includes
flash
triggering
SFP+ Transceiver suits wireless backhaul applications.
2013-09-25 14:30:44| Industrial Newsroom - All News for Today
Suited for single-mode fiber applications up to 2 km, Model TRS5013WV is compliant with IEEE 10G Ethernet transceiver standards as required by CPRI specification covering CPRI rates from 2457.6 Mbps (Option 3) to 9830.4 Mbps (Option 7). Pluggable, multi-rate 1 Watt module uses Fabry-Perot laser and operates over extended temperature range of -40 to +85°. This story is related to the following:Computer Hardware and PeripheralsWireless Transceivers | Fiber Optic Transceivers
Tags: applications
wireless
suits
transceiver
Dual-Rate LR4 Transceiver is pluggable and 100G MSA compliant.
2013-09-25 14:30:44| Industrial Newsroom - All News for Today
Dual-rate 100G CFP2 LR4 transceiver is fully interoperable with the 100G CFP LR4 transceiver, supporting both OTU-4 and 100GbE interfaces. Pluggable and 100G MSA compliant, this solution is also interoperable with Xilinx Virtex®-7 H580T FPGA for OTU-4 based on OIF CEI-28G-VSR board interface specification. Transceiver supports 103.125 and 111.810 Gbps dual-rate operation, complies with CFP MSA at 12 W power consumption, and offers 8 ports for CFP2. This story is related to the following:Line Transceivers |
Tags: compliant
100g
msa
transceiver
Oclaro Announces Standards-Compliant Multi-Rate 10G DWDM Tunable SFP+ Optical Transceiver
2013-09-19 06:00:00| Industrial Newsroom - All News for Today
Supports PIN or APD optical interfaces and limiting or linear electrical interfaces based on customer requirements<br /> <br /> SAN JOSE, Calif. – Oclaro, Inc. (NASDAQ: OCLR), a leading provider and innovator of optical communications solutions, today announced a standards-compliant, multi-rate tunable SFP+, which supports rates between 9.95 Gbit/s and 11.3 Gbit/s and is tunable across the entire C-band with 96 channels on the ITU-T 50-GHz grid. The transceiver module complies with the ...This story is related to the following:Optical Transceivers
Tags: optical
announces
10g
transceiver
Sites : [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] next »