je.st
news
Tag: leds
Infrared LEDs suit remote controls and touch panels.
2013-06-12 14:34:35| Industrial Newsroom - All News for Today
With 1.2 mm height, IR26-71C Series consists of 940 nm side-view SMD infrared LEDs with radiant intensity of 5 mW/sr and 8 mW/sr or more at 20 mA. Viewing angle of 50° ensures that remote control does not need to be directly pointed towards receiving device. Based on similar package design, IR26-61C IRLEDs have 1.2 mm height and viewing angle of 20° for use in 5–32 in. optical touch panel applications. This story is related to the following:Surface Mount Device (SMD) LED's |
Tags: touch
remote
controls
suit
Dow Corning Sees Broader Adoption of LEDs in General Lighting Applications Driven by Higher ...
2013-06-11 06:00:00| Industrial Newsroom - All News for Today
Guangzhou, China – Increases in LED power and output over the past decade have fueled adoption first in mobile device displays, then in flat panel televisions and now in general lighting applications. Asia currently leads the market transition to LEDs for general lighting, driven especially by swift penetration in China, according to analyst firm McKinsey & Company, which projects China's compound annual growth rate for LED-based general lighting to be 43 percent through 2016.Dow Corning ...This story is related to the following:LED Lighting
Tags: general
higher
applications
lighting
Infrared LEDs suit intelligent touch panels, proximity sensors.
2013-06-07 14:30:27| Industrial Newsroom - All News for Today
Intended for proximity sensor applications as well as optical touch panels, 2 top view SMD 850 nm LEDs include HIR89-01C with 30° viewing angle and radiant intensity of 55 mW/sr at 70 mA as well as HIR91-01C/L297 with 40° viewing angle and intensity of 40 mW/sr at 70 mA. For side-view touch applications smaller than 80 in., HIR83-01B is supplied in SMD package and features radiant intensity of 5 mW/sr at 20 mA and viewing angle of 100°(X)/40°(Y). This story is related to the following:Light Emitting Diodes (LED)
Tags: touch
suit
intelligent
panels
Mid-Power LEDs suit light bar and bulb retrofits.
2013-05-10 14:31:25| Industrial Newsroom - All News for Today
Supplied in standard 5630 package, Series 62-217D includes 0.5 W version for 40/60 W bulb retrofits and 0.2 W version for light bars. Both white top-view LEDs are available across complete ANSI CCT range of 2,700–6,500 K. Units offer minimum CRI of 80Ra and lumen output of 50 lm (WW) and 55 lm (CW). Cool white 0.5 W version is available up to 9,000 K CCT and achieves efficiency of 115 lm/W at 5,700 K. Measuring 5.6 x 3.0 x 0.65 mm, LEDs are Pb-free and RoHS-compliant. This story is related to the following:White LED's |
Conductive Die Attach Adhesive supports small die and LEDs.
2013-05-08 14:30:59| Industrial Newsroom - All News for Today
Featuring high glass transition temperature to facilitate wire bonding, CA-105 Die Attach Adhesive is suitable for attaching LEDs and other small semiconductor die to silver and copper lead frames. Product has dispensing open time greater than 24 hours, measured as 25% increase in viscosity, while maintaining optimized rheology for pin transfer or needle dispensing. This story is related to the following:Die Attached Adhesives |
Tags: die
small
supports
attach
Sites : [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] next »