je.st
news
Tag: dcdc
Isolated DC-DC Converters suit battery-powered applications.
2014-01-30 14:33:44| Industrial Newsroom - All News for Today
Rated at 3 W, PQMC3-S Series is available with input ranges of 4.5~9, 9~18, 18~36, or 36~75 Vdc while PQM3-M Series offers input ranges of 9~18, 18~36, or 36~75 Vdc. Both families come in single output voltages of 5, 12, or 15 Vdc, and PQMC3-S also provides dual output voltages of ±5, ±12, or ±15 Vdc. Outputs are fully regulated to within ±0.2% for all line and load conditions. Housed in 8-pin SIP and 16-pin SMT packages, respectively, converters operate from -40 to +85°C at 100% load. This story is related to the following:DC To DC Converters
Tags: applications
suit
isolated
converters
Isolated, Encapsulated DC/DC Converters suit harsh environments.
2014-01-29 14:28:58| Industrial Newsroom - All News for Today
Offering efficiency ratings of 88%, SPM series comprises 5-sided shielded converters that measure 25.4 x 25.4 x 10.41 mm and incorporate PWM technologies and synchronous rectification techniques. SPM15 series is designed for applications that require Vin ranges of 9–36 V or 18–75 V @ 15 W, while SPM25 series covers applications requiring Vin from 36–75 V @ 25 W. Both series provide single output voltages of 3.3, 5, or 12 Vdc, and SPM15 further offers 15 Vdc output option. This story is related to the following:Encapsulated Power Supplies |
Tags: suit
isolated
environments
harsh
DC/DC Converters meet MIL-STD-461 D, E, and F.
2014-01-22 14:32:32| Industrial Newsroom - All News for Today
With built-in EMI filter, 5 W Series 3090 enables compliance with EMC requirements for aerospace, defense, and civil aviation airborne electronics. Units operate from nominal 28 Vdc power sources and are available with single or dual outputs. Packaged in hermetic case measuring 1.08 x 1.08 x 0.380 in., converters are robust enough to operate through MIL-STD-704A 80 V/100 mS power line transients. This story is related to the following:DC To DC Converters
Tags: f
meet
converters
dcdc
Synchronous DC/DC Regulators incorporate MOS.
2014-01-20 14:31:20| Industrial Newsroom - All News for Today
Synchronous DC/DC step down regulators of Panasonic NN30195A Series comprise controller IC and two power MOSFETs. Along with built-in MOS, features include hysteretic control topology that provides accelerated response to minimize output voltage change when load current suddenly changes. Other features include internal compensation with built-in UVLO, thermal shut down, over and under voltage detection, and over current protection. This story is related to the following:Controls and ControllersSearch for suppliers of:
Tags: incorporate
mos
regulators
synchronous
DC-DC Converter Module suits FPGA and embedded applications.
2014-01-17 14:32:37| Industrial Newsroom - All News for Today
Consisting of non-isolated buck converter without PWM controller, Power Block OKLP-X/35-W12-C measures 25.4 x 12.7 x 11.1 mm and has typ efficiency rating of 94%. Input voltage is 12 Vdc nominal and can accommodate range of 7–13.2 Vdc. Single package solution incorporates all power handling components, fully tested and characterized for thermal and dynamic performance. When coupled with ZMDI's ZSPM1035 single-phase digital PWM IC controller, unit offers 35 A point-of-load solution. This story is related to the following:Buck/Boost Converters | Power Converters
Tags: applications
module
converter
embedded
Sites : [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] next »