je.st
news
Tag: dcdc
Surface Mount DC/DC Converter delivers up to 468 W.
2013-05-21 14:33:49| Industrial Newsroom - All News for Today
Based on 32-bit ARM microcontroller, FRIDA II BMR456-SI Advanced Bus Converter is available in two input voltage ranges of 36–75 V and 40–60 V, delivering output power of 420 W and 468 W, for telecom and datacom applications, respectively. Output voltage can be adjusted across 4.0–13.2 V range via PMBus commands, making module suitable for Dynamic Bus Voltage operation. In addition, digital converter delivers typical efficiency of 96.5% and exhibits flat curve behavior from 14–100% load. This story is related to the following:DC To DC Converters
Tags: w
surface
mount
converter
DC-DC Converters target fuel cell powered systems.
2013-05-17 14:31:21| Industrial Newsroom - All News for Today
Accepting 50–120 V input from fuel cells, FC Series delivers stabilized output up to 500 W with power efficiency up to 91%. Units are available with output voltages of 12, 24, 28, and 48 Vdc. Housed in full brick 11.68 x 6.10 x 1.27 cm format with power densities up to 5.53 W/cm³, modules include over-voltage, under-voltage, and short-circuit protection, as well as monitoring feature that safeguards against system failure. Units operate from -20 to +100°C with MTBF of 1.1 million hours. This story is related to the following:Green & CleanSearch for suppliers of:
Tags: powered
systems
cell
target
DC/DC Converters feature UL 60601 medical approval.
2013-05-14 14:31:03| Industrial Newsroom - All News for Today
Housed in 2 x 1 in. case with 2:1 input range and nominal input voltages of 12, 24, and 48 Vdc, TMR Series provides 10 W of fully regulated output power. Converters offer single outputs of 5 and 12 Vdc as well as dual outputs of ±12 and ±15 Vdc. Encapsulated with thermally conductive potting compound in non-conductive UL94V-0 rated plastic case, RoHS-compliant devices operate from -40 to +75°C and have 4,200 Vac isolation. This story is related to the following:DC To DC Converters
Tags: medical
feature
approval
converters
Isolated DC/DC Converters have SMT, radiation-hardened design.
2013-05-09 14:30:36| Industrial Newsroom - All News for Today
Suited for aerospace applications, SB30-100 series provides SEE-rated protection – 100 kRad (Si) TID – against total dose ionized radiation. Features include ability to directly convert power from satellite solar panel to end voltages required by FPGAs, DSPs, CPUs, MCUs, and other digital devices. Designed and constructed using SMT, converters provide 3 independent isolated outputs, typically at +5.0, +3.3 and +2.5 V at 30 W total, each of which is adjustable to ±10% and has its own PWM. This story is related to the following:DC To DC Converters
Tags: design
isolated
converters
smt
Fully Regulated 40 W DC/DC Converter offers 4:1 input range.
2013-05-02 14:28:18| Industrial Newsroom - All News for Today
Delivering up to 40 W of fully regulated output power from 2 x 1 in. footprint, TMF Series offers nominal inputs of 24 and 48 Vdc; single outputs of 3.3, 5, 12, 15, and 24 Vdc; and dual outputs of ±12 and ±15 Vdc. Operating efficiencies are rated as high as 90%, and standard features include remote on/off, output trim, and short circuit protection. Operating from -40 to +51°C without any de-rating, RoHS-compliant series is encapsulated with thermally conductive potting compound. This story is related to the following:DC To DC Converters
Tags: range
offers
fully
input
Sites : [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] next »