je.st
news
Tag: indexable
Indexable Milling Grade aids high-temperature alloy machining.
2014-06-25 14:29:29| Industrial Newsroom - All News for Today
Available in face, copy, and shoulder milling platforms, KCSM30 enables shops to increase cutting speeds to 230 sfm while increasing tool life and accelerating milling of titanium. Fine-grained carbide substrate promotes strength and stability, while TiAlN PVD coating delivers wear resistance. Grade is also available in Beyond Blast composition, where integral coolant channels deliver coolant through insert precisely to cutting edge under chip to optimize reduction of heat and friction. This story is related to the following:Metal Cutting Tools | Milling Cutters
Tags: grade
aids
alloy
machining
Indexable Inserts suit steel turning applications.
2013-09-25 14:30:44| Industrial Newsroom - All News for Today
Capable of retaining intact edge line in high temperatures, GC4325 Coated Cemented-Carbide Grade covers extended ISO P25 application areas, including materials ranging from ductile low-carbon steels to high-alloy hard steels, bar material to forgings, and castings to pre-machined parts. This story is related to the following:Carbide Inserts |
Tags: applications
steel
suit
turning
Indexable Ceramic Inserts suit super alloy turning operations.
2013-02-19 14:28:30| Industrial Newsroom - All News for Today
Used for turning applications involving Inconel, Waspaloy, Stellite, and other heat-resistant super alloys, silicon nitride-based WIS10 (Sialon ceramic) and WWS20 with silicon carbide whiskers (Whisker ceramic) are optimized for hardness, heat resistance, and wear resistance. WIS10 suits light roughing to semi-finishing operations, while fracture-resistant WWS20 delivers toughness for turning forged or cast out-of-round workpieces with uneven surfaces or heavy interruptions. This story is related to the following:Indexable Inserts |
Tags: super
operations
suit
turning
Multipurpose Milling Cutters offer up to 8 indexable positions.
2013-01-29 14:29:31| Industrial Newsroom - All News for Today
Specifically engineered for titanium and stainless steel applications, KSRM™ Series supports pocketing, profiling, ramping, and plunging with up to 1 mm fz. Inserts are available in 12 and 16 mm dia for KSRM face mills and screw-on, Weldon®, and cylindrical KSRM end mills. SGE styles are designed for medium and heavy milling tasks, while ELE inserts should be used at low cutting forces and to avoid edge build-up. In addition, 20 mm dia insert is available for KSRM face mill models. This story is related to the following:Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor AdSearch for suppliers of: Metric Milling Cutters | Indexable Inserts
Tags: offer
positions
milling
cutters