je.st

Home › stacks

Tag: stacks

Ethernet Industrial DIO Module integrates in PC/104-based stacks.

2014-05-19 14:30:51| Industrial Newsroom - All News for Today

Supplied in 4 x 4 x 1.7 in. steel enclosure with anti-skid bottom for control and monitoring applications, Model ETH-DIO-48 can add portable DIO to any Ethernet network. Module features 48 or 24 industrial strength TTL DIO lines, and each I/O line is buffered and capable of sourcing 32 mA or sinking 64 mA. Jumper selected resistors permit user configuration of I/O lines for pull-up to +5 Vdc, pull-down to ground, or floating. Connections to board are made via two 50-pin, IDC-type headers. This story is related to the following:Computer Hardware and PeripheralsSearch for suppliers of: Ethernet I/O Devices

Tags: industrial module dio ethernet

Solid-Carbide Drill produces burr-free holes in CFRP-metal stacks.

2014-03-14 13:30:37| Industrial Newsroom - All News for Today

Used for drilling composite fiber-reinforced polymer (CFRP)-metal stacks in hole diameter ranges of 3/16–5/8 in., B55_DAL operates with standard through coolant, MQL, or dry. Double-angle point design lends to centering capability, while sharp edge cleanly cuts CFRPs in top layer of stacks and cleanly exits titanium or aluminum side. Stack drill can be applied in all combinations of stacks, and fine-grain solid-carbide Beyond™ KN15™ grade is polished for optimal chip evacuation.<br /> This story is related to the following:Solid Carbide Drills

Tags: produces holes drill stacks

Solid-Carbide Drill cuts through CFRP-titanium stacks.

2014-02-20 14:31:06| Industrial Newsroom - All News for Today

Operating with through-coolant or without, B55_DAL drills CFRP-metal stacks in hole diameters of 3/16–5/8 in. Double-angle point design provides optimized centering, while sharp edge cleanly cuts composite fiber-reinforced polymers in top layer and exits titanium or aluminum side without burrs. For optimized chip evacuation, fine-grain solid-carbide Beyond™ KN15™ grade is highly polished. Drill can be applied in all combinations of stacks: CFRP-Ti-Al, CFRP-Ti, CFRP-Al, and straight Ti or Al. This story is related to the following:Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category SponsorMetalworking Tools | Solid Carbide Drills | Drills |

Tags: cuts drill stacks