je.st
news
Tag: converters offer
DC-DC Converters offer greater than 94.5% efficiency.
2014-05-13 14:30:47| Industrial Newsroom - All News for Today
Housed in full-brick format, 800 Watt AGF800 Series includes 48 V model that delivers up to 16.7 A output current and 28 V model that provides up to 28.6 A output current. Both operate from -40 to +85°C ambient temperature, and can continue to operate at full power up to 100°C baseplate temperature – all without air cooling. For maximum power density and efficiency, 48 V Model AGF800-48S48 supports high power wireless base station deployments using GaN technology. This story is related to the following:DC To DC Converters | Electric Converters |
Tags: offer
greater
efficiency
converters
Analog-to-Digital Converters (12-bit) offer 5 analog input ranges.
2014-02-11 14:32:02| Industrial Newsroom - All News for Today
Offering 8 µsec conversion time, ADC-85 series comes in hermetically sealed, 32-pin, side-brazed DDIP or gull-wing SMT ceramic package. Each unit features ½ LSB linearity and is 100% tested for performance across one of 3 temperature ranges: 0 to +70°C, -40 to +100°C, and -55 to +125°C. Along with parallel and serial digital outputs, units feature short-cycling support, internal buffer amplifier, and output coding that is complementary binary/offset binary or complementary 2's complement. This story is related to the following:Analog-to-Digital Converters
Tags: offer
input
ranges
analog
DC/DC Converters offer alternative power system design.
2013-11-07 14:30:57| Industrial Newsroom - All News for Today
Architected as non-isolated buck converter without PWM controller, Power Blocks provide alternative design approach for non-isolated DC/DC conversion. Single-component solution, suited for FPGAs, ASICs, computing, and IBA architectures, incorporates all power handling components and supports use with analog or digital PWM controllers. Measuring 12.7 x 17.02 x 10.7 mm, OKLP-X/25-W12-C is 25 A rated module with efficiency rating of 93.5% typ and 7–13.2 Vdc input range. This story is related to the following:DC To DC Converters |
Tags: system
design
power
offer
DC to DC Converters offer output voltages up to 10 kV.
2013-08-23 14:27:47| Industrial Newsroom - All News for Today
Manufactured using all surface mount construction, Models ECHV and ECHV-H are floating, quasi-regulated power supplies with 1 kV and 10 kV I/O isolation, respectively, while Model ECHV-R is non-isolated, regulated power supply. Units operate from 5 or 12 V input and deliver 1 W output. Output voltage is independent of input voltage and is proportional to programming voltage. Encapsulated in 1.8 x 1.0 x 0.4 in. package, converters are suited for small equipment requiring high voltage biasing. This story is related to the following:DC To DC Converters |
Miniature DC-DC Converters offer 5.2 kV isolation.
2013-02-14 14:26:14| Industrial Newsroom - All News for Today
Supplied in SIP format, fully encapsulated MEJ2 series includes through-hole, 2 W DC/DC converters available with single or dual outputs that cover nominal voltages of 3.3, 5, 9, 12, or 15 Vdc. Input voltage variants accommodate 3.3, 5, 12, or 15 Vdc. Converters are recognized to UL60950 for basic/supplementary insulation for voltages up to 200 Vrms. With internal physical spacings and factory test voltage of 5.2 kV, series can be used in high-noise environments. This story is related to the following:DC To DC Converters |
Tags: offer
isolation
miniature
converters