je.st
news
Tag: laser measures
Laser Sensor measures thickness of coils in slitting lines.
2014-01-21 14:29:00| Industrial Newsroom - All News for Today
Used to determine thickness profile of individual metal strips in slitting lines, thicknessCONTROL MTS 8201.LLT O-frame measurement system uses two laser triangulation profile sensors to perform alloy-independent measurements with accuracy to few micrometres. Laser line sensor addresses specific measurement tasks, including channelled sheets and thickness of sandwich plates made from non-homogeneous materials. Non-contact thickness measurements are performed continuously. This story is related to the following:Laser Sensors | Thickness Measuring & Testing Instruments
Tags: lines
measures
laser
sensor
Pyroelectric Laser Energy Sensor measures as low as 50 nJ.
2014-01-09 14:30:32| Industrial Newsroom - All News for Today
Featuring broad spectral range operating from 150 nm to 12 µm, Model PE9-ES-C measures at high repetition rates up to 10 kHz. Unit features 8 mm active aperture area and supports pulse widths to 20 µs. User-adjustable threshold prevents false readings in noisy environments, while built-in wavelength correction ensures accuracy and repeatability. Up to 250,000 points of data can be stored on-board in nonvolatile memory and can be sent to computer for analysis and storage. This story is related to the following:Sensors, Monitors and Transducers Sponsored by: BEI Sensors (BEI Industrial Encoders) - Cat Sponsor Jan 2014 Search for suppliers of: Energy Meters |
Laser Power Meter measures up to 30 kW.
2013-05-21 14:33:49| Industrial Newsroom - All News for Today
Featuring 74 mm aperture for large diameter beams, 30K-W Laser Power Meter measures YAG and fiber lasers in 800-2,000 nm range and CO2 lasers at 10.6 microns. Meter is based on thermopile technology. Reflective cone deflects laser beam onto inner circumference of sensor, minimizing power density to manageable levels. Created for material processing lasers used in metal cutting and welding, meter offers response time of less than 10 sec and can withstand max average power density up to 10 kW/cm². This story is related to the following:Communication Systems and EquipmentSearch for suppliers of: Laser Power Meters
Tags: power
measures
meter
laser
Thermal Detector measures laser power, position, and size.
2013-05-15 14:30:33| Industrial Newsroom - All News for Today
Available with 12–50 mm aperture sizes, BeamTrack FL250A-BB-50-PPS measures power, beam position, and beam size of lasers up to 250 W. Unit also measures energy from 80 mJ to 300 J and provides information on beam centering and wander. Beam position is accurate to 0.2 mm and beam size is accurate to +/-5% for Gaussian beam. Capable of measuring spectral range from 150 nm to 20 µm, detector features Smart Connector interface that operates with StarLite, Nova II, and Vega smart displays. This story is related to the following:Sensors, Monitors and TransducersLaser Power Meters | Laser Beam Analyzers |
Tags: size
power
position
measures
Laser Beam Profiling System measures widths to 35 mm.
2013-02-07 14:28:00| Industrial Newsroom - All News for Today
Along with 4008 x 2672 pixel format that allows profiling of beams up to 24 x 36 mm without requiring reduction optics, L11059 USB Large Format Beam Profiling Camera features 50 mm ND filters that provide max power density measurements to 15 mW/cm² without additional attenuation. Frame rates of up to 3.1 fps are supported at full resolution (up to 17 Hz in 4x4 binning mode). Featuring 59 dB dynamic range, camera can measure CW laser beams over spectral range from 190–1,100 nm. This story is related to the following:Optics and PhotonicsSearch for suppliers of:
Tags: system
mm
measures
laser