je.st
news
Tag: harsh
AC Load Banks withstand harsh testing environments.
2013-05-29 14:30:15| Industrial Newsroom - All News for Today
Models LB-30-208-3-1, LB-60-208-3-5, LB-100-208-3-5, and LB-100-MV-12.5 are self-contained, 50/60 Hz AC Load Banks designed for portable AC load testing. Resistors are built for durability, and individual fan switches, load step switches, and master load switches facilitate use. Along with digital LED display operator control panel, solutions come with safety features for fast acting, branch circuit fuse protection and sensors to prevent overheating and current overload. This story is related to the following:Test and Measuring InstrumentsSensors, Monitors and TransducersSearch for suppliers of: Master Switches | Back-Up Power Supplies | Load Banks | Resistors
Tags: testing
load
banks
environments
Rugged RS-485/-422 Transceivers withstand harsh environments.
2013-05-29 14:30:14| Industrial Newsroom - All News for Today
Supplied in 8 NSOIC and 14 NSOIC packages, XR3080-88X series supports data rates up to 20 Mbps in full or half duplex configurations. Analog bus pins withstand direct shorts to ±18 V and are protected from ESD events beyond ±15 kV. Profibus-compliant output drivers afford additional noise margin or extended cable lengths. Operating from +4.5 to +5.5 V supply, these 1-driver/1-receiver RS-485 devices draw <600 mA from +5.0 V supply and 300 mA typ when idling with receivers active. This story is related to the following:Transceivers
Tags: environments
harsh
rugged
withstand
Wire-To-Board IDC Connectors withstand harsh environments.
2013-05-24 14:36:19| Industrial Newsroom - All News for Today
Providing gas-tight, plated through-hole wire-to-board termination, 9177-600 Series is available as single-contact or fully integrated capped contact solution. Units feature opposing dual phosphor-bronze tines and exhibit optimized spring characteristics, ensuring stable termination during extreme temperatures, shock, and vibration. Capable of accepting 12-18 AWG stranded or solid wires, RoHS-compliant connectors are rated for up to 15 A per contact and 600 Vac at temperatures from -40 to +125°C. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Search for suppliers of: Insulation Displacement Connectors
Tags: environments
harsh
connectors
idc
Rugged SBC runs compact displays in harsh environments.
2013-05-22 14:27:57| Industrial Newsroom - All News for Today
Model SC27 SBC, using 1.6 GHz Intel Atom processor, is suited for LCD TFT displays with 7–15 in. screens and maximum resolution of 1,280 x 768 pixels. Fanless unit dissipates up to 7 W and, with temperature sensor to monitor and control display, operates over -40 to +85°C range. Up to 2 GB of DDR2 SDRAM memory and 16 Mbits of boot Flash are included, along with I/O such as Ethernet and USB interfaces. Components withstand shock up to 50 m/s² for 30 msec and lifetime vibration of 7.9 m/s². This story is related to the following:Ruggedized Computers |
Tags: runs
compact
displays
environments
Metal Detector withstands harsh sanitation environments.
2013-05-14 14:31:03| Industrial Newsroom - All News for Today
With operating life of 10+ years, APEX HD withstands extreme temperature cycling typically experienced in fresh food processing and sanitation environments. System can operate in cold rooms kept between 35–40°F and withstand wash down at temperatures up to 150°F several times per day without degradation. In addition to optimized case design and aperture filling technique, detector features control panel with one-way vent that allows any trapped humidity to escape. This story is related to the following:Food Metal Detectors |
Tags: metal
environments
detector
harsh
Sites : [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] next »