je.st
news
Tag: design features
Drilling Center features triple spindle design.
2015-09-25 14:31:09| Industrial Newsroom - All News for Today
Targeting heat transfer industry, Quickdrill III features rigid gantry design, high pressure coolant system, and standard triple spindle design to prevent drilling bottlenecks. System's 60 hp spindle is combined with 4:1 two-speed gearbox, delivering 845 lb-ft of max torque, more than enough to drill thick tube sheets, baffle stacks, and condenser plates. Custom Quickcode III software simplifies programming process.
Tags: design
center
features
triple
Heat Sink Mounting System features 3-piece design.
2015-09-24 14:31:07| Industrial Newsroom - All News for Today
Consisting of PEM® Type HSCB™ captivating screw and PEM Type HSL™ spring mated to PEM Type HSR™ broaching receptacle nut or standoff, Heat Sink Mounting System securely attaches heat sinks to PCBs while providing firm and constant contact to chip component for optimized heat dissipation. Audible click serves to prevent over tightening by signaling when screw is fully engaged. Screws and broaching nuts or standoffs can be specified in thread sizes #4-40 to #6-32 / M3 and in various lengths.
Tags: system
design
features
heat
Steam Trapping Station features leak-free body design.
2015-09-23 14:31:06| Industrial Newsroom - All News for Today
Comprising isolation valve, steam trap connector with strainer, and check valve in modular single-piece body, STS17.2 Steam Trapping Station eliminates potential leak paths caused by multiple screwed connections. Technology allows steam trap to be changed in minutes, minimizing plant downtime. Featuring stainless steel components and pre-assembled construction, STS17.2 can integrate steam trap monitor, allowing for quick recognition of trap failure.
Tags: design
features
body
station
Actuator Control features microprocessor-based design.
2015-09-21 14:31:09| Industrial Newsroom - All News for Today
Combining AC to DC switching power supply with regenerative PWM drive, DCH Series is suited for applications requiring control of 12 or 24 Vdc motors when only 115 or 230 Vac power is available. With isolated front end, series is compatible with 0-5 or 0-10 Vdc analog signals from any PLC. True low voltage output allows control over low voltage motors without current spikes or large Bus voltage. With 4Q reversing, actuator can perform contactorless braking and/or reversing-on-the-fly.
Tags: design
control
features
actuator
USB Mouse features ergonomic, ambidextrous design.
2015-09-18 14:31:08| Industrial Newsroom - All News for Today
Made for both left- and right-handed users, Hanger Wired Mouse features left and right buttons, silicone housing with curved silhouette, and silicone rubber wire. Product does not require any software or installation setup, and ergonomic grip helps prevent fatigue. With 1,000 dpi sensitivity, optical sensor enables mouse to be used on any surface. Mouse supports Windows XP/Vista/7/8 as well as Linux kernel 2.6 or later and Mac OS X 10.4 or later.
Tags: design
features
usb
mouse
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] next »