je.st
news
Tag: coaxial
Accurately Characterize Loss and Reflection of Long, Embedded Coaxial Transmission Systems
2014-05-13 15:59:21| rfglobalnet Downloads
This application covers an introduction to typical problems that occur when coaxial transmission systems are permanently installed in an enclosed environment, the benefits of swept frequency measurements over single or multiple CS frequency point measurements (along with a detailed list of what is needed to perform said measurements), step-by-step instruction of the procedure, and more
Tags: long
systems
loss
transmission
Accurately Characterize Loss And Reflection Of Long, Embedded Coaxial Transmission Systems
2014-05-06 14:54:57| rfglobalnet Downloads
Properly measuring end-to-end loss in coaxial and waveguide systems can present significant challenges once those systems are permanently installed (embedded) and their physical ends are located at far distances away from each other. In this application note, we will show how it is possible to easily and accurately measure end-to-end loss and reflection on embedded coaxial transmission systems using a swept frequency range, where each end of the system is separated by long physical distances. We will also demonstrate how the S820E is also capable of performing these measurements with only one calibration required.
Tags: long
systems
loss
transmission
Flexible Coaxial Cable withstands repeated bends.
2014-05-06 14:30:28| Industrial Newsroom - All News for Today
Identical to LMR-600-UF UltraFlex, 50 Ω Model CA600FLEX utilizes multiple solid copper strands for center conductor which withstands repeated bends. Cable has black thermoplastic elastomer jacket and is suitable for indoor or outdoor use. Product is available in bulk 500 ft reels, by foot, or via antenna cables with numerous lengths and connector options. This story is related to the following:Computer Hardware and PeripheralsSearch for suppliers of: Coaxial Cables
Tags: cable
flexible
repeated
coaxial
Solid State Coaxial Limiters Datasheet
2014-04-28 18:21:51| rfglobalnet Downloads
This series covers the UHF to Ka-Band. Download the datasheet for specifications on peak and average power handling, pulse width, insertion loss, flat and spike leakage, and recovery time.
Tags: state
solid
solid state
coaxial
Coaxial Fixed Attenuators range from DC to 40 GHz.
2014-04-23 14:30:35| Industrial Newsroom - All News for Today
Rated at 2 Watts, BW Series offers attenuation levels from 3–20 dB with flatness of ±1.0 dB or better across entire frequency range. Precision attenuators provide matching to 50 Ω with 1.2:1 typical VSWR. Equipped with passivated stainless steel 2.9 mm connectors, devices are suited for variety of applications including matching, instrumentation, and test setups. This story is related to the following:Fixed Attenuators | Attenuators |
Sites : [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] next »