je.st
news
Tag: led drivers
Constant Current LED Drivers suit low-wattage lighting systems.
2014-07-08 14:31:19| Industrial Newsroom - All News for Today
Offering up to 86% efficiency, LCM-25 and LCM-25DA 25 W LED power supplies let designers implement low-wattage intelligent LED lighting control systems and project style lighting designs. Output can be set to levels from 350 mA to over 1 A via built-in DIP switch. While LCM-25 features 2-in-1 dimming function that can be driven by 0–10 Vdc or by PWM control inputs, digital LCM-25DA is additionally equipped with DALI interface and pushbutton dimming function. This story is related to the following:LED Power Supplies | Dimmable LED Drivers |
Tags: current
systems
led
constant
LED Fog Lights help drivers perceive contrasts.
2014-06-13 14:32:53| Industrial Newsroom - All News for Today
Combining fog light and daytime running light, Argus Series provides clear forward visibility when driving in dense fog or heavy downpours. Single-chip LED sources run on 1 W and produce lighting effect as high as 150 lm with sunlight color temperature of 5,600 K. Available in 3.5 x 3.5, 2.5 x 2.5, and 1.5 x 1.5 mm packages, LEDs are AEC-Q101 certified. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - MOBILE BANNER ADSearch for suppliers of: LED Lights | Daytime Running Lights |
AC Input LED Drivers are offered in low-power versions.
2014-05-30 14:31:06| Industrial Newsroom - All News for Today
Eliminating flicker while promoting efficiency, DLE25 and 35 series come in IP67-rated, 3.68 x 2.89 x 1.29 in. enclosure and incorporate universal input with active PFC in 2 power stage design. Drivers, designed as class II isolation product without need for safety earth, are also approved as class 2 limited power source. Dimmable constant current versions are available with facility for PWM, voltage, and resistance programming. Typical operating efficiency is 78%–83%. This story is related to the following:Dimmable LED Drivers | Integrated Circuits (IC)
Tags: led
offered
input
versions
Next-Generation Automotive LED Drivers For Front And Rear Lights Bring Reliability And Flexibility To Exterior Lighting
2014-05-30 11:49:54| autocentral News Articles
Texas Instruments (TI) (NASDAQ: TXN) today introduced the automotive industry's first two-channel switching LED driver for front lights and the only linear LED driver with single short LED detection for rear lights
Tags: to
front
bring
automotive
LED Drivers support front and rear automotive lights.
2014-05-23 14:31:21| Industrial Newsroom - All News for Today
Designed for rear lights, Model TPS92630-Q1 provides single LED short detection and full diagnostic capabilities, giving designers flexibility to meet different countries' traffic regulations. Device supports up to 15 IC connections on one bus, as well as easy control logic without extra microcontroller. For front lights, Model TPS92602 offers 2-channel switching. Device supports both linear analog dimming with high-side current sensing and PWM dimming with high-side PMOS FET. This story is related to the following:Integrated Circuits (IC) | LED Drivers
Tags: support
front
automotive
led
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] next »