je.st
news
Tag: sensor suits
Magnetic Angle Sensor suits automated applications.
2013-12-20 14:28:23| Industrial Newsroom - All News for Today
Based on external position magnet, PRAS26 offers constant, wear-free operation and absolute output signal over entire 0 to 360° measurement range. Flat housing is constructed of heat-resistant materials, such as thermoplastic and epoxy glass fiber; carries IP67 rating; and measures 9.5 mm high. Equipped with 0.5–4.5 V, 0.5–10 V, or 4–20 mA analog outputs, sensor features completely encapsulated electronics that withstand shock, vibration, and moisture penetration. This story is related to the following:Rotary Position/Angle Sensors | Magnetic Sensors
Tags: applications
angle
magnetic
automated
Robotic Collision Sensor suits small payloads.
2013-09-12 14:30:03| Industrial Newsroom - All News for Today
Designed to absorb crash and reset itself, Model SR-48 virtually eliminates tool damage, downtime, and need for human intervention. In operation, sensor is adjusted to support typical loads experienced by robot arm in all directions: angular, compression, and torsional. Following crash, sensor uses precise locating components to reset within 0.001 in. of original position. Three-wire PNP proximity switch, set to actuate within 0.020 in. of axial motion, ensures reliable switch performance. This story is related to the following:RoboticsSensors | Robotic Systems | Robot Accessories | Automation Equipment | Anti-Collision Sensors
Tags: small
sensor
suits
collision
XMC Card suits sensor interface applications.
2013-08-29 14:30:52| Industrial Newsroom - All News for Today
Based on sFPDP IP core which is optimized for Xilinx Virtex 6 LX75T, quad-channel Titan Serial FPDP XMC supports link speeds up to 4.25 Gbaud and is fully compliant with VITA 17.1 Serial FPDP specification. Card's x8 PCI Express interface to host processor allows high bandwidth for full channel utilization, up to 425 MBps per sFPDP channel. Operating from -40 to +85°C, card includes 1 GB DDR3 SDRAM buffer memory for use as ultra-deep FIFO in applications needing data stream elasticity. This story is related to the following:Computer Hardware and PeripheralsSearch for suppliers of:
Tags: card
applications
interface
sensor
RFID Electronic Safety Sensor suits wash down applications.
2013-08-06 14:32:28| Industrial Newsroom - All News for Today
Using RFID for protection against tampering, non-contact Model RSS36 is designed for safety circuits monitoring position of hinged, sliding, or removable guards. Since sensor uses special frequency, it will disregard non-actuator RFID signals, and passive RFID tag in actuator will not interfere with other RFID systems such as product trackers. Sensor and actuator can be sealed into IP69K rated, corrosion-resistant housing for use in hygienic or outdoor environments with high pressure wash downs. This story is related to the following:Safety Sensors | Non-Contact Sensors |
Tags: applications
safety
electronic
wash