je.st
news
Tag: transmitters offer
Pressure Transmitters offer high pressure spike resistance.
2016-03-31 14:31:09| Industrial Newsroom - All News for Today
Suited for industrial and OEM environments, Model 247/347 Series features all-welded design with bonded foil strain gauge on hardened stainless steel diaphragm, along with fully potted electronics. For lower pressure measurements (3–200 psi), piezoresistive silicon sensing element is also incorporated. Available in 24 full-scale pressure ranges, transmitters offer weather-resistant DIN 43650 connector, 6-pin Bayonet or direct coupled cable, and choice of ¼ in. NPT or SAE female pressure port.
Tags: high
offer
pressure
resistance
Guided Wave Radar Level Transmitters offer 3 probe configurations.
2016-03-11 14:31:07| Industrial Newsroom - All News for Today
Offered in up to 9.8 ft rod and coaxial as well as up to 18.0 ft cable probe configurations, LVRD10 Series provides continuous level measurement with 4–20 mA signal output. Contact liquid level sensor is intended for low-corrosive chemical, waste, oil, or water storage applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Sensor is configured using software.
Intrinsically Safe Transmitters Offer Flexibility
2015-07-15 14:57:29| Chemical Processing
Omega expands its offering of intrinsically safe pressure and load products.
Tags: offer
safe
flexibility
transmitters
Differential Pressure Transmitters offer 3 selectable outputs.
2014-08-05 14:32:05| Industrial Newsroom - All News for Today
Equipped with 4-digit LCD that shows either static pressure or differential pressure, Series PX2600 features 4 unidirectional and 4 bi-directional ranges, pushbutton or remote zero, and 3 selectable outputs of 0–5 Vdc, 0–10 Vdc, or 4–20 mA 2-wire. Supplied in glass-filled polyester case, CE-compliant products are suited for building energy management systems, process control systems, and pressure drops across ductwork. This story is related to the following:Pressure Transmitters |
Tags: offer
pressure
differential
outputs
I/P Transmitters offer switch-selectable output.
2014-04-09 14:30:59| Industrial Newsroom - All News for Today
Designed to meet NEMA 4X requirements, IPH2/IPX2 Current-to-Pressure Transmitters accept current signal from DCS, PLC, or other control system and convert it into pneumatic signal to provide proportional control of valves, actuators, and other pneumatically controlled devices. Two-wire units feature 22 direct and reverse output ranges, with switch-selectable reverse output standard on IPX2. In addition, IPX2 is explosion proof for hazardous areas and offers removable electronics module. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - MOBILE BANNER ADSearch for suppliers of: Pressure Transmitters | Current-To-Pressure (I/P), Voltage-To-Pressure (E/P) Converters
Tags: offer
output
transmitters
transmitters offer