Home 100 mhz
 

Keywords :   


Tag: 100 mhz

Variable Gain RF Amplifier covers 100 MHz to 18 GHz range.

2016-01-21 14:31:06| Industrial Newsroom - All News for Today

Featuring 19 in. rackmount design, Model PE15A7000 offers broadband frequency coverage from 100 MHz to 18 GHz with high gain levels of 50 dB minimum over temperature range of -40 to +85°C. Digitally controlled attenuators offer dynamic range up to 60 dB with 1 dB step size. Typical performance includes 6.5 dB noise figure and +14 dBm output P1dB. Package design supports front panel LED display with manual control dial and SMA connectors, and 9 pin D-Sub Miniature connector on rear panel.

Tags: range gain covers variable

 

FPGA-Based Prototyping System delivers 100 MHz max performance.

2015-09-23 14:31:05| Industrial Newsroom - All News for Today

HAPS®-80 FPGA-Based Prototyping Systems deliver up to 100 MHz multi-FPGA performance and high-speed time-domain multiplexing (HSTDM) technology. Along with ProtoCompiler design automation and debug software, solution uses Xilinx Virtex UltraScale VU440 devices with 26-million-ASIC-gates capacity per FPGA; designs up to 1.6 billion ASIC gates are supported. Components accelerate software development, hardware/software integration, as well as system validation.

Tags: system performance max mhz

 
 

20-500 MHz, 100 Watt Power Amplifier: ATL-25801 Datasheet

2015-08-07 13:11:42| rfglobalnet Downloads

The ATL-25801 is a 20-500 MHz high-power RF alto amplifier featuring 100 Watts saturated power, 55 dB gain, and 50 ohm SMA RF connectors. These RF power amplifiers are designed for applications including broadband jamming, electronic warfare, EMC testing, mobile and other fixed terminals, and terrestrial point to point and point to multipoint.

Tags: power mhz watt amplifier

 

20-500 MHz, 100 Watt Power Amplifier: ATL-25801 Datasheet

2015-08-07 13:11:42| rfglobalnet Home Page

The ATL-25801 is a 20-500 MHz high-power RF alto amplifier featuring 100 Watts saturated power, 55 dB gain, and 50 ohm SMA RF connectors. These RF power amplifiers are designed for applications including broadband jamming, electronic warfare, EMC testing, mobile and other fixed terminals, and terrestrial point to point and point to multipoint.

Tags: power mhz watt amplifier

 

Richardson RFPD Introduces New 100 MHz To 6 GHz UltraCMOS SPDT RF Switch From Peregrine

2014-11-19 04:02:38| rfglobalnet Home Page

Richardson RFPD, Inc. announced recently the availability and full design support capabilities for a new RF single-pole double-throw (SPDT) switch from Peregrine Semiconductor Corporation.

Tags: switch mhz ghz introduces

 

Sites : [1] [2] [3] next »