je.st
news
Tag: esd
ESD Cleanroom Wipe Dispenser eliminates waste, contamination.
2013-11-07 14:30:57| Industrial Newsroom - All News for Today
Featuring ESD plastic construction, countertop or wall-mountable GRAB-EEZ™ eliminates waste of wipes used in cleanroom by making it almost impossible to grab more than one wipe simultaneously. Model LIBGENTI-712 ISO Class 5 (Class 100)-compatible, 7 x 12 in. wipes, featuring double C-folded design, stack flat within dispenser. Each wipe offers exposed edge to facilitating grabbing by personnel, which also negates cross-contamination concerns. This story is related to the following:Cleaning Products and EquipmentSearch for suppliers of: Cleanroom Products | Single Dose Antibacterial Wipes | Dry Wiper Dispensers
Tags: waste
contamination
eliminates
wipe
ESD Floor Finish enhances industrial environment safety.
2013-08-28 14:30:36| Industrial Newsroom - All News for Today
Created for industrial areas and open area environments requiring static protection, EpoxyStyle ESD 2-part epoxy floor finish becomes dry to touch within 5–7 hr after application and is ready for traffic 10–12 hr after application. Chemical- and abrasion-resistant product complies with Ozone Transport Commission and California VOC regulations, may be installed over old VCT and concrete, and provides uniform matte finish; gloss can be attained when used with DuraShield ESD finish. This story is related to the following:Paints and CoatingsSearch for suppliers of: Floor Finishes |
Tags: industrial
environment
safety
floor
Ceramic TVS Devices provide bi-directional ESD protection.
2013-08-23 14:27:45| Industrial Newsroom - All News for Today
Combining electrical characteristics of TransGuard® Transient Voltage Suppressors and Feedthru Capacitors in single chip, TransFeed Automotive Series provides overvoltage circuit protection and EMI reduction over broad range of frequencies. Units offer working voltage of 5.6–18 Vdc, clamping voltage of 18-50 V, energy rating of 0.05–0.3 J, and peak current of 15–120 A. Featuring multilayer ceramic construction, devices operate from -55 to +125°C with response times from 200-250 psec. This story is related to the following:Electrical Equipment and Systems Sponsored by: Globtek Inc. - MOBILE BANNER ADSearch for suppliers of: Transient Voltage Surge Suppressors
Tags: provide
protection
devices
ceramic
ESD Protection Diode is designed for portable electronics.
2013-08-19 14:27:36| Industrial Newsroom - All News for Today
Housed in 0.6 x 0.3 x 0.27 mm CLP0603 package, Model VBUS05A1-SD0 offers low capacitance of <0.8 pF for protection of high-speed data lines against transient voltage signals. Bi-directional, symmetrical diode features max leakage current of <0.1 µA at working voltage of 5.5 V, breakdown voltage of 8.8 V typical at 1 mA, and max clamping voltage of 18 V at 2.5 A. Lead-free and halogen-free, RoHS-compliant device provides transient protection for 1 data line as per IEC 61000-4-2 at ±13 kV. This story is related to the following:Electronic Components and Devices Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Search for suppliers of: Transient Suppressor Diodes
Tags: designed
electronics
protection
portable
ESD to Design Renewable Energy Data Centers for Vieste Energy
2013-08-06 15:45:00| Electrical Construction & Maintenance
Data centers to be supported by the co-development of 8MW to 15MW of power generated from gasification based waste-to-energy facilities read more
Tags: data
design
energy
centers
Sites : [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] next »