je.st
news
Tag: dielectric
Cargill Industrial Specialties-Natural and Synthetic Ester Fluids and Dielectric Fluids for Transformers
2014-09-24 16:32:00| Power Technology
As a recognized dielectric fluids expert, Cargill Industrial Specialties supplies Envirotemp natural and synthetic ester fluids, for power and distribution transformers globally.
Tags: for
industrial
synthetic
ester
Guide Covers All Aspects of Dielectric Breakdown Voltage Testing
2014-07-15 17:03:00| Transmission & Distribution World
The latest publication from portable test equipment expert, Megger, provides a compact yet comprehensive guide to the frequently misunderstood subject of oil dielectric breakdown voltage testing. read more
Tags: guide
testing
aspects
covers
15kW Dielectric Load Model 8941-115SC1
2014-06-10 21:21:03| rfglobalnet Products
The 8941-115SC13, 15 kW, Oil-Cooled Termination with 115 VAC Blower Assembly is a general purpose, 50 ohm, coaxial RF transmission line termination, useful as standby reject load or dummy load. It provides accurate, dependable, and low reflection line termination over a frequency range of dc – 20 MHz. Up to 15,000 watts can be dissipated. The loads have a coolant chamber surrounded by radiator fins. The front and rear fins form mounting flanges which can be used as supports for freestanding use or as brackets for fixed mounting. A vent plug at the top of the unit relieves internal pressure from coolant expansion and a blower assembly with three axial fans that line the bottom of the load.
Tags: model
load
dielectric
15kw
Optically Clear, Condensation Curing Silicone Offers Superior Dielectric Properties
2014-06-02 06:00:00| Industrial Newsroom - All News for Today
Developed for potting and encapsulation applications where an addition cured silicone cannot be used, Master Bond MasterSil 152 is a two component, condensation curing system that only requires air for complete cross-linking. Unlike addition cured systems, there are no substrates that will inhibit the cure.<br /> <br /> This system fully cures at room temperature in 24-48 hours and has low exotherm. MasterSil 152 features low shrinkage upon curing. It has a ten to one mix ratio by weight and ...This story is related to the following:Materials and Material ProcessingSearch for suppliers of: Potting Compounds | Silicones
Tags: offers
clear
properties
superior
Purification Systems keep dielectric insulating oils clean.
2014-03-10 13:30:42| Industrial Newsroom - All News for Today
By employing single-pass HVTOPS and multi-pass DOPS Systems, oil in transformers and circuit breakers can be kept clean and dry. Systems can remove 100% of free water and 99% of dissolved water to achieve overall moisture content of <10 ppm. Additionally, dissolved air and entrained gases are removed to <0.25% of overall content. Available in sizes from 5–44 gpm, systems can also remove particulate contamination down to 1 micron and can remove acids to achieve .05 mg KOH/gm or lower. This story is related to the following:Lubrication Oil Purification Systems | Purification Systems
Tags: systems
clean
oils
purification