je.st
news
Tag: converter dcdc
3.5 A Constant On-Time, Step-Down DC-DC Converter: SKY87202 Datasheet
2015-12-01 11:11:00| rfglobalnet Home Page
The SKY87202 is a constant on-time, step-down DC-DC converter designed to provide output voltage from 0.6 V to 3.3 V while keeping excellent line and load regulation and maximizing input efficiency. This converter features a constant on-time control that allows simple loop stabilization with minimal external components, and cycle-by-cycle current limits and thermal shutdown for protection against fault conditions.
Tags: constant
converter
datasheet
ontime
3.5 A Constant On-Time, Step-Down DC-DC Converter: SKY87202 Datasheet
2015-12-01 11:11:00| wirelessdesignonline Downloads
The SKY87202 is a constant on-time, step-down DC-DC converter designed to provide output voltage from 0.6 V to 3.3 V while keeping excellent line and load regulation and maximizing input efficiency. This converter features a constant on-time control that allows simple loop stabilization with minimal external components, and cycle-by-cycle current limits and thermal shutdown for protection against fault conditions.
Tags: constant
converter
datasheet
ontime
Low-Profile DC-DC Converter suits rugged applications.
2015-11-27 14:31:07| Industrial Newsroom - All News for Today
Measuring 4.5 x 6 x 0.75 in., Model LMA501 provides 750 W of power with 93% typical efficiency and is designed to complement VME550 Series of rack-mounted 28 Vdc power cards. Converter can also be configured with other output voltages of 12, 24, and 48 Vdc and may be paralleled for higher power capabilities. Featuring cold plate cooled design, COTS military power supply is suitable for use in unmanned vehicles and aircraft, robotics, and defense equipment.
Tags: applications
converter
suits
rugged
DC/DC Converter offers power density of 395 A/in.
2015-11-20 14:31:05| Industrial Newsroom - All News for Today
Delivering 60 A, Model BMR466 is designed to power microprocessors, FPGAs, ASICs, and other digital ICs on complex boards. Up to 8 fully regulated point-of-load DC/DC converters can be connected in parallel to deliver up to 480 A in multi-module and multi-phase systems. Housed in 0.98 x 0.55 x 0.276 in. surface-mount LGA package with symmetric contact layout, converter operates from 4.5–14 V input and provides adjustable output voltage of 0.6–1.8 V via pin-strap resistor or PMBus commands.
Tags: power
offers
density
converter
Full Brick 1,000 W DC/DC Converter offers paralleling capability.
2015-11-17 14:31:07| Industrial Newsroom - All News for Today
Operating from 9–36 Vdc input range, FXP series offers 24 and 28 Vdc output voltages and 2,250 Vdc input to output isolation. Up to 3 full bricks can be set up in parallel with no external circuitry required for output power of up to 2.8 kW. Efficiency up to 96.5% and power density is accomplished, in part, via synchronous rectification technology, and current sharing among converters is achieved using droop method; no current share pin is required.
Tags: full
offers
converter
capability
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] next »