je.st
news
Tag: ethernetip
Compact Embedded PC links EtherCAT I/O to EtherNet/IP devices.
2016-02-10 14:31:04| Industrial Newsroom - All News for Today
In addition to use as stand-alone controller, 64 x 100 x 73 mm CX8095 can be used as tie-in to EtherNet/IP systems as single EtherNet/IP slave. Embedded PC behaves like 2 EtherNet/IP devices and thereby process 2X EtherNet/IP process data when optional virtual device (slave interface) is activated. Along with 32-bit, 400 MHz ARM9 CPU, features include 64 MB RAM, MicroSD card (4 GB max), and capacitive 1 sec UPS. Unit, programmed via TwinCAT PLC automation software, runs Windows Embedded CE.
Tags: links
devices
compact
embedded
Network Tester evaluates 10 Gbps/1 Gbps Ethernet/IP networks.
2016-02-05 14:31:05| Industrial Newsroom - All News for Today
Providing two 10 Gbps optical ports and two 10/100/1,000 Mbps electrical/optical ports, PacketExpert™ 10G is capable of generating/receiving traffic with stacked VLAN (Q-in-Q) and stacked MPLS, making it suited for wide range of networks. Wire speed BERT capability measures Bit Error Rate on Layer1, Framed Ethernet (Layer2), MPLS (Layer2.5), IP, and UDP layers. PacketExpert™ 10G also supports all RFC 2544 Tests for performance benchmarking of individual network elements.
Tags: network
networks
tester
evaluates
Ethernet/IP Tester validates SLAs to ITU-T Y.1564 standard.
2016-02-01 14:31:06| Industrial Newsroom - All News for Today
With ExpertSAM™, users can test ability of Ethernet-based services to carry variety of traffic at defined performance levels. Application is based on ITU Y.1564 standard and supports testing of 10 Gbps Ethernet links. Throughput, Frame Loss, Frame Delay, and Frame Delay Variation (cumulatively known as Service Acceptance Criteria) are measured and compared to expected values for each service ensuring it is within committed range or threshold defined for guaranteed traffic such as CIR.
Tags: standard
tester
validates
slas
Ethernet/IP Tester supports 10G and 1G Ethernet/IP networks.
2015-12-02 14:31:06| Industrial Newsroom - All News for Today
Featuring two 10 Gbps optical ports and two 10/100/1,000 Mbps electrical/optical ports, PacketExpert 10G™ is capable of BERT, Smart Loopback, and RFC 2544 testing. Solution specifically supports Wirespeed Record and Playback, Simulation of IP Links and Impairments (IPLinkSim™), PacketBroker, and Y.1564 Testing (ExpertSAM™) test functionalities. These tests are supported on each port independently for Wirespeed Ethernet/VLAN/MPLS/IP/UDP testing.
Tags: networks
supports
tester
10g
Mentor Graphics Announces Softing Industrial Automation EtherNet/IP and OPC UA Support in Nucleus RTOS and Mentor Embedded Linux Runtimes
2015-10-13 12:31:12| Industrial Newsroom - All News for Today
WILSONVILLE, Ore. - NEWS HIGHLIGHTS: -- The Mentor Graphics Nucleus Real-time operating system (RTOS) and Mentor Embedded Linux runtime are integrated with the Softing EtherNet/Industrial Protocol (IP) and Open Platform Communication (OPC) Unified Architecture (UA) industrial...
Tags: support
industrial
linux
graphics