je.st
news
Tag: conductivity
Conductivity Meter uses sample-independent smart probes.
2015-06-24 14:31:07| Industrial Newsroom - All News for Today
With line of smart probes, Model 2100 can measure conductivity of liquids from 10-3 S/cm, such as low concentration of salt solutions in water, down to 10-15 S/cm, approaching hexane and other highly non-polar solvents. Factory-calibrated probes are completely sample-independent; there is no need to recalibrate probe every time sample with different conductivity or dielectric constant is measured. Probes can be disassembled for cleaning and reassembled in seconds with no change in cell constant.
Tags: meter
smart
probes
conductivity
Epoxy Polysulfide System exhibits high thermal conductivity.
2015-05-20 14:31:05| Industrial Newsroom - All News for Today
Along with 9-10 BTU•in/ft²•hr•°F thermal conductivity, EP21TPFL-1AO electrically insulative, 2-part system exhibits chemical resistance and offers 150%–200% elongation, 70-90 Shore A hardness, and 2:3 mix ratio by weight or volume. Black and white color coding facilitates mixing, and working life is 90–120 min at 75°F. Curing fully at ambient temperatures, flexible product adheres to metals, ceramics, composites, glass, rubbers, and plastics. Service range is -60 to +250°F.
Tags: high
system
exhibits
thermal
New Degassed Cation Conductivity System For Detection Of Corrosive Contaminants In Power Plants
2015-05-06 07:15:24| metrologyworld Home Page
High purity water is used in the water/steam cycle in power generation and maintaining its purity is essential to ensure that sensitive equipment such as turbines are not damaged by contaminants.
Tags: system
power
plants
detection
New Degassed Cation Conductivity System For Detection Of Corrosive Contaminants In Power Plants
2015-05-06 07:15:24| pollutiononline News Articles
High purity water is used in the water/steam cycle in power generation and maintaining its purity is essential to ensure that sensitive equipment such as turbines are not damaged by contaminants.
Tags: system
power
plants
detection
Conductivity Meter utilizes remote sensor.
2015-04-09 14:31:07| Industrial Newsroom - All News for Today
Comprising inductive sensing element and transmitter with integrated CombiView display, CombiLyz AFI5 offers 14 selectable measurement ranges from 500 µS/cm to 1,000 mS/cm, including conductivity, concentration, temperature, current output, switching states, and device status. Sensing element and transmitter can be installed separately and connected via cable. With max deviation of <1%, sensor has response time of <0.3 sec for conductivity measurements and <15 sec for temperature.
Tags: meter
remote
sensor
utilizes
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] next »